Page 178 - Dust Explosions in the Process Industries

Dust Explosions: An Overview 75 7

Nettleton, M. A. (1986) “The Effects of the Properties of Ignition Source and Particles on the Ignition
of Coal Dust Flames.” Archivum Combustionis 6, pp. 125-138.
Nindell, G., W. Lukas, and R. Junghans. (1981) “Untersuchungsergebnisse zur Explosionsneigung
hybrider Gemische beim Elektroabscheiderbetrieb.”Staub-Reinhalt. Luji 41, pp. 184-189.
Noha, K.(1989) “Auswahlkriterien fur Explosionsschutzmassnahmen.”VDI-Berichte [VDI-Verlag
GmbH, Diisseldorfl701, pp. 681-693.
North East University of Technology. (1987, September) Proceedings of the Shenyang Inteunational
Symposium on Dust Explosions. Shenyang, Peoples Republic of China: NEU.
Palmer, K. N. (1973a) Dust Explosions and Fires. London: Chapman and Hall.
Palmer: K. N. (1973b) “Dust Explosion Hazards in PneumaticTransport.” Fire Research Note No. 992.
Borehamwood, UK: Fire Research Station.
Palmer.,K. N. (1975) “Explosions in Dust Collection Plant.” The Chemical Engineer, pp. 136-142.
Palmer, K. N., and P. S. Tonkin. (1973) “Use of Inert Gas to Prevent Dust Explosions.” Proceedings
of European Symposium, ed. F. J. Weinberg. London: Combustion Institute.
Parpart, J. (1979) Entstaubung von Kohlenstaubanlagen. Zement-Kalk-Gips 32 pp. 265-269.
Pasman, H. J., and C. J. M. van Wingerden. (1988, November) “Explosion Resistance of Process
Equipment.” Proceedings of the Conference on Flammable Dust Explosions, St. Louis.
Patzke, J. (1984) “Explosionsdruckentlastung von Kohlenmahltrocknungsanlagen.” VDZ-Berichte
[VDI-Verlag GmbH, Dusseldorfl494, pp. 271-276.
Pedersen, G. H.. and R. K. Eckhoff. (1987) “Initiation of Grain Dust Explosions by Heat Generated
during Single Impact between Solid Bodies.” Fire Safety Journal 12, pp. 153-164.
Pedersen, G. H.,and B. A. Wilkins. (1988) “Explosibility of Coal Dusts and Goal Dusfiimestone
Mixtures at Elevated Initial Pressures.” Report No. 88/02101. Bergen, Norway: Chr. Michelsen
Institute.
Pelhont, G. (1979) “Explosions-und Ziindverhalten von hybriden Gemischen aus brennbaren Stauben
und Brenngasen.” Doctoral thesis No. 6498. ETH, Zurich
Perry> R.. H., and D. Green. (1984) Perry’s ChemicalEngineers’Handbook, 6th ed. New York: McGraw-
Hill.
Pfeiffer, W., 6.Kiihnen, and L. Armbruster. (1985) “Feinheit von Holzstauben.” Staub-Reinhalt. Luft
45, pp. 515-518.
Finean, J. P. (1984a) “Dust Explosions in Vessels Connected to Ducts.” VDZ-Berichte [VDI-Verlag
GmbH, Diisseldorfl 494, pp. 67-80.
Fineau, J. P. (1984b) “SCcurit6 incendie et explosion des installations de fabrication de poudre de lait.”
Annales des Mines de Belgique 7-8, pp. 302-318.
Fineau, J. P. (1985, April) “SCcuritC incendie et explosion des installations de fabrication de poudre
de lait.” In Proceedings of the Internatiional Symposium on the Control of Risks in Handling and
Storage of Granular Foods. Paris: APRIA.
Pinkwasser, T.(1985, April) “On the Extinction of Smouldering Fires in Pneumatic Conveyors.” In
Proceedings ofthe Znternatiional Symposium on the Control of Risks in Handling and Storage of
Granular Foods. Paris: APRIA.
Pinkwasses, T. (1986,April) “On the Ignition Capacity of Free-Falling Smouldering Fires.” Euromech
Colloquium 208, Explosions in Industry.
Pinkwasser, T.,and P. Haberli. (1987) “ExplosionPressure Relief in Large-VolumeStorage Bins.” Bulk
Solids Handling 7, pp. 83-85.
Piotrowski, T., T. Mrzewinski, and H. Proskurmicka. (1988) “New Classification System of Dust
Hazards in Industrial Technological Processes.” Warsaw, Poland: Institute of Organic Industry.
Polikarpov, A. D. (1984) “Formation of an Air Shock Wave During Explosion of SulphideDust” (trans-
lation from Fiziko-Tekhnicheskie Probl. Raz. Pol. Zsk.). New York: Plenum Publishing, pp. 212-216.
Pritchard, D. K. (1989) “A Review of Methods for Predicting Blast Damage from Vapour Cloud
Explosions.” Journal of Loss Prevention in the Process Industries 2, pp. 187-193.
Proctor, A. (1988, October) “Tailored Training.” Process Engineering, pp. 4145.