Page 581 - Dust Explosions in the Process Industries

548 Dust Explosions in the Process Industries

Rogerson, J. (1989) “Standard for Minimum Autoignition Temperature of Dust Clouds” (2nd draft)
Committee E-27. Philadelphia:ASTM.
Schwab,R. F. (1968) “Interpretation of Dust Explosion Test Data.”MCh.E, LossPrevention2, pp. 3743.
Selle,H. (1957) “Die Grundziige der Experimentalverfahren zur Beurteilung brennbarer Industriestiiube.”
VDZ-Berichte [VDI-VerlagGmbH, Diisseldorfl 19, pp. 37-48.
Siwek, R. (1988, November) “Reliable Determination of Safety Characteristics in 20 Litre Apparatus.”
Proceedings of the Conference on Flammable Dust Explosions, St. Louis.
Siwek, R., and G. Pellmont. (1986,April) “Safety Technical Indices: Methods of Determination and
Factors Influencing Hazard Evaluation in Dust Handling Equipment.” Proceedings of the
EUROMECH Colloquium 208, Explosions in Industry, Gottingen, Federal Republic of Germany.
Snee, T. J. (1987) “Incident Investigation and Hazard Evaluation Using Differential Scanning
Calorimetry and AcceleratingRate Calorimetry.”Journal of OccupationalAccidents 8, pp. 261-27 1.
Townsend, D. I., and J. C. Tou. (1980) “Thermal Hazard Evaluation by an Accelerating Rate
Calorimeter.” TherrnochimicaActa 37, pp. 1-30.
Ural, E. A. (1989a, April) “Dispersibilityof Dusts Pertainingto their ExplosionHazard.”Factory Mutual
Research Report J.I. OQ2E3. RK. Nonvood, MA: Factory Mutual Research.
Ural, E. A. (1989b, July) “Experimental Measurement of the Aerodynamic Entrainability of Dust
Deposits.” Proceedings of the 12th International Colloquium on Dynamic Explosion Reaction
Systems,Ann Arbor, MI.
Verein deutscher Ingenieure. (1988) “Untersuchungsmethodenzur Ermittlung von sicherheitstech-
nischen Kenngrossen von Stauben.” VDZRichtlinie [VDI-VerlagGmbH, Diisseldorfl2263 (draft).
Zeeuwen,J. P. (1982) “Reviewof CurrentResearch at TNO into Gas and Dust Explosions.”Proceedings
of the International Conference on Fuel-Air-Explosions,Montreal, Canada (November4-6, 1981).
Ontario, Canada: University of Waterloo Press, pp. 687-702.
Zeeuwen, J. P., and G. F. M. van Laar. (1984,April) “A Practical Look at Dust Explosion Characteristics.
Explosion Protection in Practice.” Proceedings of the First International EuropEx Symposium,
Antwerp, Belgium.
Zhu Hailin, Liu Xiangjun, and Li Hongquan. (1988) “Influenceof Type of Chemical Igniter on Violence
of Maize Starch and Aluminium Dust Explosions in a Closed 20 Litre Sphere.” Fire Safety Journal
13, pp. 181-183.
Zuzuki, T., Takaoka, S., and Fujii, S. (1965, July) “The Ignition of Coal Dust by Rubbing, Frictional
Heat and Sparks.” Proceedings of the Restricted International Conferenceof Directors of Safety in
Mines Research, held at Safety in Mines Research Establishment, Sheffield, UK.