Page 577 - Dust Explosions in the Process Industries

544 Dust Explosions in the Process Industries

REFERENCES

Allen, J., and H. F. Calcote. (1981) “Grain Dust Ignition by Friction Sparks.”SMS-81-049. Washington,
DC: National Grain and Feed Association.
Allen, T. (1981) Particle Size Measurement, 3rd ed. London: Chapman and Hall.
American Society for Testing and Materials. (1988a) “ASTM Standard E 680-79 (Reapproved 1984)
for Drop Weight Impact Sensitivity Testing of Solid-Phase Hazardous Materials.” Annual Book of
ASTM Standards, vol. 14.02. Philadelphia: ASTM, pp.405-411.
American Society for Testing and Materials. (1988b) “ASTM Standard E 789-86 for Pressure and Rate
of Pressure Rise for Dust Explosions in a 1.2Liter Closed CylindricalVessel.” Annual Book ofASTM
Standards, vol. 14.02. Philadelphia: ASTM, pp. 488-506.
American Society for Testing and Materials. (1988~)“ASTM Standard E 1226-88 for Pressure and
Rate of Pressure Rise for Combustible Dust.” Annual Book ofASTM Standards, vol. 14.02.
Philadelphia: ASTM, pp. 688-698.
American Society for Testing and Materials. (1989) “ASTM Standard E 1232for Testing of Temperature
Limit of Flammability of Chemicals.” Annual Book ofASTM Standards, vol. 14.02. Philadelphia:
ASTM.
Bartknecht, W. (1978) Explosionen-Ablauf und Schutzmassnahmen. Berlin: Springer-Verlag.
Bartknecht, W. (1987) Staubexplosionen-Ablauf und Schutzmassnahmen. Berlin: Springer-Verlag.
Beck, H., and N. Glienke. (1985) “Verfahren zur Bestimmung brann- und explosionstechnischer
Kenngrossen von Staben.” Staub-Reinhalt. Luft 45, pp. 532-535.
Berthold, W. (1987) “Bestimmung der Mindestziindenergie von Staub/Luft-Gemischen.” VDI-
Fortschrittberichte. Reihe 3: Verfahrenstechnik, no. 134. Diisseldorf: VDI-Verlag GmbH.
Bowes, P. C. (1984) Self-Heating: Evaluating and Controlling the Hazards. Amsterdam: Elsevier
Publishing Co.
Bowes, P. C., and S. E. Townshend. (1962) “Ignition of Combustible Dusts on Hot Surfaces.” British
Journal ofApplied Physics 13, p. 105.
Boyle, A. R., and E J. Llewellyn. (1950) “The Electrostatic Ignitability of Dusts and Powders.”
Transactiorzsof the Chemical Industry (London) 69, pp. 173-181.
Burgoyne, J. H. (1978, February) “The Testing and Assessment of Materials Liable to Dust Explosion
or Fire.” Chemistry and Industry, pp. 81-87.
Burke, R. (1988, May) “Development of a 20 Litre Sphere Dust Explosion Test Facility.” Technical
Report FMRC J.I. OQ2E1. RK. Norwood, MA: Factory Mutual Research.
Carr, R. L. (1965, January) “Evaluating Flow Properties of Solids.” Chemical Engineering, pp.
163-168.
Cashdollar,K. L., and M. Hertzberg. (1985) “20 Litre Explosibility Test Chamber for Dusts and Gases.”
Review of Scientijic Instruments 56, pp. 596-602.
Cashdollar, K. L., M. J. Sapko, E. S. Weiss, et al. (1987) Industrial Dust Explosions. In Laboratory
and Mine Dust Explosion Research at the Bureau of Mines. Special Technical Publication 958.
Philadelphia: ASTM, pp. 107-123.
Committee on Evaluation of Industrial Hazards. (1979) “Test Equipment for Use in Determining
Classifications of Combustible Dusts.” Report NMAB 353-2. Washington, DC: National Materials
Advisory Board.
Conti, R. S., K. L. Cashdollar, M. Hertzberg, et al. (1983) “Thermal and Electrical Ignitability of Dust
Clouds.” Report Inv. 8798. Washington,DC: U.S. Bureau of Mines, U.S. Department of the Interior.
Cuckler, L. E. (1987) Moisture Content Measurement. In McGraw-Hill Encyclopedia of Science and
Technology, 6th ed., vol. 11. New York: McGraw-Hill, pp. 303-306.
Cybulski, W. (1975) Coal Dust Explosions and Their Suppression. (English translation published by
Foreign Scientific Publications.) Warsaw, Poland: National Center for Scientific, Technical and
Economical Information.