Page 611 - Dust Explosions in the Process Industries

578 Dust Explosions in the Process industries

Greiner, H. (2001, September) “IP Degrees of Protection.” Danfoss publication SD 101 E, BAU
5003784. Esslingen, Germany: Danfoss Bauer GmbH.
Greiner, H. (2002, March) “Explosionsschutzbei Getriebemotoren, Teil 111:Staub-explosionsschutz.”
Danfoss publication SD 302, BAU 5004071.Esslingen, Gemany: Danfoss Bauer GmbH, pp. 18/1-LiIW3.
Harper, D. J., K. E. Plain, and J. S. Wilton. (1997) “Use of Intrinsically Safe Circuits and Enclosures
to Control the Ignition Risk from Equipment in Powder Handling Plant.” In Hazards XZIZ. ICHEME
Symposium Series No. 141. Rugby, UK: Institution of Chemical Engineers, pp. 463480.
IEC. (1992, November) “Hazard Classificationof Combustible Dusts.” Doc. SC31H(Sec)l9. Geneva:
International Electrotechnical Commission.
IEC. (1994a) “Method for Determining Minimum Ignition Energy of Dust/Air Mixtures.” IEC inter-
national standard 1241-2-3. Geneva: International Electrotechnical Commission.
IEC. (1994b) “Electrical Apparatus for Use in the Presence of Combustible Dust. Part 2: Test Meth-
ods. Section 1: Methods for Determining the Minimum Ignition Temperatures of Dust.” Geneva:
Central Office of IEC.
IEC. (1999a) “Electrical Apparatus for Use in the Presence of Combustible Dust. Part 1-1. Electrical
Apparatus Protected by Enclosures and Surface Temperature Limitation-Specification of
Apparatus.” IEC final draft international standard 61241-1-1, 1999-02-12. Geneva: International
Electrotechnical Commission.
IEC. (1999b) “Electrical Apparatus for Use in the Presence of Combustible Dust. Part 1-2. Electrical
Apparatus Protected by Enclosures and SurfaceTemperatureLimitation-Selection, Installation and
Maintenance.” IEC final draft international standard 61241-1-2, Second ed. 1999-06. Geneva:
International Electrotechnical Commission.
IEC. (1999~)“Electrical Apparatus for Explosive Gas Atmospheres. Part 11. Intrinsic Safety ‘i’.”
International standard IEC 60079-11. Geneva: International Electrotechnical Commission.
IEC. (2001a) Draft SPS for discussion at the meeting of TC 31 in Seoul, IEC document 31/376/LNF.
2001-05-04, p. 3 (SC 31H). Geneva: International Electrotechnical Commission.
IEC. (2001b, March) “Electrical Apparatus for Use in the Presence of Combustible Dust. Part 4: Type
of Protection ‘pD’.” IEC international standard 61241-4. Geneva: International Electrotechnical
Commission, Central Office.
IEC. (2001c, February) “Degrees of Protection Provided by Enclosures (IP Code),” 2nd ed. IEC inter-
national standard 60529. Geneva: International Electrotechnical Commission, Central Office.
IEC. (2001d, February) “Electrical Apparatus for Explosive Gas Atmospheres. Part 2. Pressurised
Enclosures ‘p’,”4th ed. IEC international standard 60079-2. Geneva: International Electrotechnical
Commission, Central Office.
IEC. (2002a) Proposed change to the scope of TC 3 1, IEC document 31/405/Q, 2002-02-01. Geneva:
International Electrotechnical Commission.
IEC. (2002b) “ElectricalApparatus for Use in the Presence of CombustibleDust. Part 10. Classification
of Areas Where Combustible Dusts Are or May Be Present.” Draft IEC international standard
61421-10, 2002-04-26. Geneva: International Electrotechnical Commission.
IEC. (2002~)“Electrical Apparatus for Use in the Presence of Combustible Dust. Part 0. General
Requirements.” IEC draft international standard 61421-0, 2002-04-26. Geneva: International
Electrotechnical Commission.
IEC. (2002d) “Electrical Apparatus for Use in the Presence of Combustible Dust. Part 1. Protection
by Enclosure ‘tD’.”IEC draft international standard 61421-1, 2002-04-26. Geneva: International
Electrotechnical Commission.
IEC. (2002e) “Electrical Apparatus for Use in the Presence of Combustible Dust. Part 14. Selection
and Installation.’’ IEC draft international standard 61421-14, 2002-04-26. Geneva: International
Electrotechnical Commission.
IEC. (2002f) “Electrical Apparatus for Use in the Presence of Combustible Dust. Part 18. Protection
by Encapsulatione ‘mD’.” IEC draft international standard 61421-18, 2002-09-6. Geneva:
International Electrotechnical Commission.