Page 683 - Dust Explosions in the Process Industries

650 Dust Explosions in the Process Industries

CEN. (August 2001) “Explosion SuppressionSystems.” European Union draft standard prEN 14373,
CEN/TC 305 WI 00305032. Prepared by CEN/TC 305 “Potentially Explosive Atmospheres.
Explosion Prevention and Protection.”
CEN. (February 2002) “Dust ExplosionVenting Protective Systems.” European Union draft standard
CEN/TC 305/WG 3/SG 5N.
CEN. (2003a) “Determinationof Explosion Characteristics of Dust Clouds. Part 1: Determination of
Maximum Explosion Pressure of Dust Clouds.” European Union Draft Standard prEN 14034-1,
February 2003. Prepared by CEN TC305 “PotentiallyExplosiveAtmospheres. Explosion Prevention
and Protection.” Brussels: CEN Central Office.
CEN. (2003b) “Determinationof Explosion Characteristics of Dust Clouds. Part 2: Determination of
the Maximum Rate of Explosion Pressure Rise of Dust Clouds.” European Union Draft Standard
prEN 14034-2, February 2003. Prepared by CEN TC305 “Potentially Explosive Atmospheres.
Explosion Prevention and Protection.” Brussels: CEN Central Office.
CEN. (2003~)“Determinationof Explosion Characteristics of Dust Clouds. Part 3: Determination of
Minimum Explosive Concentrationof Dust Clouds.” European Union Draft StandardprEN 14034-
3, February 2003. Prepared by CEN TC305 “Potentially Explosive Atmospheres. Explosion
Prevention and Protection.” Brussels: CEN Central Office.
CEN. (2003d) “Determinationof Explosion Characteristicsof Dust Clouds. Part 4: Determinationof
the Limiting Oxygen Concentrationof Dust Clouds.” European Union Draft StandardprEN 14034-
4, February 2003. Prepared by CEN TC305 “Potentially Explosive Atmospheres. Explosion
Prevention and Protection.” Brussels: CEN Central Office.
CENELEC. (July 2002) “Electrostatics. Code of Practice for the Avoidanceof Hazards Due to Static
Electricity.” Document produced by CENELEC TC 3 1, WG 20. Geneva: CENELEC Central
Office.
Chatrathi, K. (1996) “Explosion Suppression:Theory, Validation and Practice.” VDZ-Berichte[VDI-
Verlag GmbH, Dusseldorf, Germany] 1272,pp. 579-594.
Chatrathi,K., and J. Going. (May 1998)“Effectiveness of Dust Explosion Suppressants.”Proceedings
of the Ninth International Symposium on Loss Prevention and Safety Promotion in the Process
Industry, Barcelona, Spain, pp. 1008-1017.
Chatrathi, K., and J. Going. (2000) “Dust Deflagration Extinction.” Process Safety Progress 19,
pp. 146-153.
Chawla, N., P. R. Amyotte, and M. J. Pegg. (1996) “A Comparison of Experimental Methods to
Determine the Minimum Explosible Concentration of Dusts.” Fuel 75, pp. 654-658.
Chen, J.-L., R. Dobashi, and T. Hirano. (1996) “Mechanisms of Flame Propagationthrough Combustible
Particle Clouds.” Journal of Loss Prevention in the Process Zndustry 9, pp. 225-229.
Chen, Z., B. Fan, Q. Liu, and H. Li. (June 1996) “Shock Wave Induced Turbulent Combustion in
Suspension.” Proceedings of the Seventh International Colloquium on Dust Explosions, Bergen,
Norway. Bergen: GexCon AS (previously CMR).
Chernenko, E. V., L. E Alfanasyeva, and V. A. Lebedeva. (October 1993) “Flame Propagation along
the Surface of Metal Powders and Powdered Mixtures of Metal Oxides.” Proceedings of the Joint
Meeting of the Russian and Japanese Sectionsof the Combustion Institute,Chernogolovka,Moscow
Region, pp. 124-125.
Choi, K. S.,M. Yamagma, T. Kodama, et al. (2001) “Characteristicsof the Vibrating-Mesh Minimum
Ignition Energy Testing Apparatus for Dust Clouds.” Journal of Loss Prevention in the Process
Industry 14, pp. 443-4447.
Colver, G. M., S. W. Kim, and T.-U. Yu. (1996) “An Electrostatic SuspensionMethod for Testing Spark
Breakdown, Ignition and Quenching of Powders.” Journal of Electrostatics 37, pp. 151-172.
Conde-Lazaro,C., and J. Garcia-Torrent.(September 1998)“ExperimentalResearch on Explosibility
at High Initial Pressuresof Combustible Dusts.” Proceedingsof the Eighth International Colloquium
on Dust Explosions. Schaumburg,IL. Schaumburg: Safety Consulting Engineers, pp. 364-375.