Page 687 - Dust Explosions in the Process Industries

654 Dust Explosions in the Process Industries

Eckhoff, R. K. (2002) “Minimum Ignition Energy (MIE)-A Basic Ignition Sensitivity Parameter in
Design of Intrinsically Safe Electrical Apparatus for Explosive Dust Clouds.” Journal of Loss
Prevention in the Process Industry 15, pp. 305-310.
Eckhoff, R. K. (2003) “Venting of Dust Explosionsin Process Equipment. The Need for a Differentiated
Approach to Vent Sizing.” Zngenieria Quimica, Madrid, Spain (in press).
Ehlers, F. (1996) “Bedeutung fur den Betreiber aus der Sicht eines Lebensmittelbetriebes.” VDZ-
Berichte [VDI-VerlagGmbH, Diisseldorf, Germany] 1272, pp. 49-61.
Elghobashi, S. (1994) “On Predicting Particle-Laden Turbulent Flows.” Applied Scientific Research
52, pp. 309-329,
Elkotb, M. M., S. A. El-Sayed, R. M. El-Taher, et al. (1996) ”Experimental Study of Organic
Dust Ignition behind Shock Waves.” Journal of Loss Prevention in the Process Industry 9,
pp. 249-253.
El-Sayed, S. A., and A. M. Abdel-Latif. (2000) “Smoldering Combustion of Dust Layer on Hot
Surface.” Journal of Loss Prevention in the Process Industry 13, pp. 509-517.
Emde, A., and B. Penno. (1996) “Einbindung der Sauerstoffverdrangungund des Kontraktionseffektes
mit angepasstem Wiederstandsbeiwert Zeta bei der Entwicklung neuartiger Quenchvorrichtungen
zur Explosionsdruckentlastung innerhalb von Raumen.” VDI-Berichte [VDI-Verlag GmbH,
Diisseldorf, Germany] 1272, pp. 645-65 1.
European Safety Management Group. (2001) Proceedings of the International ESMG Symposium on
Process Safety and Industrial Explosion Protection, Part 1. Process Safety. Hamm, Germany:
ESMG e.V.
Faber, M. (1996) “Wirksamkeit von Explosionsdruckentlastungseinrichtungen.”VDZ-Berichte [VDI-
Verlag GmbH, Dusseldorf, Germany] 1272, pp. 483-491.
Faber, M. (February 1999) “Explosion Isolation in Combination with Other Protection Techniques.”
Proceedings of the Third World Seminar on the Explosion Phenomenon and on the Application of
Explosion Protection Techniques in Practice, Ghent, Belgium. Ghent: Flanders Expo.
Faber, M. (2001) “Explosionsschutzkonzeptebei der Oberilachenbearbeitung und -beschichtung von
Automobilkarossen.” VDI-Berichte [VDI-VerlagGmbH, Dusseldorf, Germany] 1601,pp. 28 1-291.
Fan, B. C., D. M. Ding, and M. J. Tang. (April 1993) “An Aluminium Dust Explosion in a Spherical
Closed Vessel.” Proceedings of the Fifth International Colloquium on Dust Explosions, Pultusk,
Poland, pp. 21-31.
Fan Xisheng, and Li Li Wu Jianxing. (AugusVSeptember 1994) “The Edge Effect in the Static Bursting
of Vent Closure.” Proceedings of the Sixth International Colloquium on Dust Explosions, eds. Deng
Xufan and Piotr Wolanski, Shenyang, Peoples Republic of China, pp. 553-559.
Fedorov, A.V., and Y. A. Gosteev. (June 1996) “Physical-Mathematical Investigation of Magnesium
Particle Ignition.” Proceedings of the Seventh InternationalColloquium on Dust Explosions, Bergen,
Norway. Bergen: GexCon AS (previously CMR).
Fedorov, A.V., V. M. Fomin, and T. A. Khmel. (June 1996) “Real Detonation Waves in Oxygen-
Aluminium Mixtures.” Proceedings of the Seventh International Colloquium on Dust Explosions,
Bergen, Norway. Bergen: GexCon AS (previously CMR).
Fedorov, A.V., V. M. Fomin, and T. A. Khmel. (September 1998) Self-Sustained Regimes of Non-Ideal
Detonation of Aluminium Particle Suspensions in Air (Two-Velocity, Two-TemperatureModel).”
Proceedings of the Eighth International Colloquium on Dust Explosions. Schaumburg, IL.
Schaumburg: Safety Consulting Engineers, pp. 376-387.
Fedorov, A. V., and Y. A. Gosteev. (2002) “Quantitative Description of Lifting and Ignition of Organic
Fuel Dusts in Shock Waves.” Proceedings of the Fourth International Symposium on Hazards,
Prevention and Mitigation of Industrial Explosions, Bourges, France, ed. I. Sochet. Journal of
Physics N France 12, pp. 89-95.
Fedorov, A. V., and N. N. Fedorova. (2002) “Numerical Simulations of Dust Lifting under the Action
of Shock Wave Propagation along the Near-Wall Layer.” Proceedings of the Fourth International
Symposium on Hazards, Prevention and Mitigation of Industrial Explosions, Bourges, France, ed.
I. Sochet. Journal of Physics IVFrance 12, pp. 97-104.