Page 691 - Dust Explosions in the Process Industries

658 Dust Explosions in the Process Industries

Grosskopf, V., and G. Li. (September 1998) “An Industrial Situation Which Went Wrong? Lack of
Applicable Guidelines and Standards for Coal Grinding Plants and the Way the Industry Presently
Deals with This Information Gap.” Proceedings of the Eighth International Colloquium on Dust
Explosions, Schaumburg,IL. Schaumburg: Safety Consulting Engineers, pp. 158-170.
Gui, Y. H., and Y. J. Cho. (1999) “Radiative Heat Transfer in a Circulating Fluidized Bed Coal
Combustor.” Powder Technology 102, pp. 266-273.
Gummer. J., and G. A. Lunn. (2003) “Ignitionsof ExplosiveDust Clouds by Smoulderingand Faming
Aglomerates.” Journal of Loss Prevention in the Process Industries 16, pp. 27-32.
Haefen, E. von, and H.-G. Schecker. (April 1993) “DUSTEXPERT-An Expert System for the
Assessment of Explosion Hazards and the Selection of Explosion Protection Methods for Dust
Handling Plants.” Proceedings of the Fifth International Colloquium on Dust Explosions, Pultusk,
Poland, pp. 487-496.
Hamdan, M. A., and A. Qubbaj. (1998) “Inhibition Effect of Inert Compounds on Oil Shale Dust
Explosion.” Applied Thermal Engineering 18, pp. 221-229.
Han, 0.-S., M. Yashima, T. Matsuda, et al. (2000) “Behavior of Flames Propagating through
Lycopodium Dust Clouds in a Vertical Duct.” Journal of Loss Prevention in the Process Industry
13, pp. 449-457.
Han, 0.-S., M. Yashima, T. Matsuda, et al. (2001) “A Study of Flame Propagation Mechanisms in
Lycopodium Dust Clouds Based on Dust Particles’ Behaviour.” Journal of Loss Prevention in the
Process Industry 14, pp. 153-160.
Hanai,H., M. Ueki, K. Maruta, et al. (June 1996)“Experimental Study on the Lean Flammability Limit
of Dust-Air Mixtures in Micro-Gravity.” Proceedings of the Seventh International Colloquium on
Dust Explosions, Bergen, Norway. Bergen: GexConAS (previouslyCMR).
Harmanny, A. (February 1992) “Explosion Effects.” Proceedings of the First World Seminar on the
Explosion Phenomenon and on the Application of Explosion Protection Techniques in Practice.
Arranged by EuropEx, Brussels.
Harmanny,A. (December 1993) “Durationof Vented Dust Explosions.”EuropEx Newsletter 23, pp. 5-9.
Harmanny, A. (March 1996) “StructuralAspects Related to Explosion Protection Techniques.” Proceedings
of the Second World Seminar on the Explosion Phenomenon and on the Application of Explosion
Protection Techniquesin Practice, Ghent, Belgium. Kontich, Belgium: Published by EuropEx.
Harmanny, A. (February 1999) “Structural Aspects Related to Explosion Resistance of Process
Buildings, Structures and Silos.” Proceedings of the Third World Seminar on the Explosion
Phenomenon and on the Applicationof Explosion ProtectionTechniquesin Practice, Ghent, Belgium.
Ghent: Flanders Expo.
Harmanny, A. (2001) “Pressure Effects from Vented Dust Explosions.” VDZ-Berichte [VDI-Verlag
GmbH, Diisseldorf, Germany] 1601, pp. 539-550.
Hattwig, M. (1996) “Stand der europffschen Normung fur den Staubexplosionsschutzbeim CENRC
114,CEN/TC 305 und CENELECRC 31.” VDZ-Berichte[VDI-Verlag GmbH, Diisseldorf,Germany]
1272,pp. 63-70.
Hattwig, M., and W. Hensel. (April 1993) “Applicabilityof the New VDI-Guideline3673 to Silos of
Rectangular Geometry.” Proceedings of the Fifth International Colloquium on Dust Explosions,
Pultusk, Poland, pp. 71-81.
Hauert, F. (March 1996) “Influenceof Particle Movement and Dust Concentration on the Explosion
Characteristics in the Food Industry.” Proceedings of the Second World Seminar on the Explosion
Phenomenonand on the Applicationof ExplosionProtectionTechniquesin Practice, Ghent, Belgium
Kontich, Belgium: Published by EuropEx.
Hauert, F., A. Arnold, A. Vogl, et al. (2001) “Explosionsdruckentlastung eines Kleinsilos bei pneu-
matischer Befiillung mit tangentialer Produkteinleitung.” VDZ-Berichte [VDI-Verlag GmbH,
Diisseldorf, Germany] 1601,pp. 473-481.
Hauert, F., A. Vogl, and S. Radandt. (AugusUSeptember1994) “Measurementof Turbulence and Dust
Concentration in Silos and Vessels.” Proceedings of the Sixth International Colloquium on