Page 296 - Engineered Interfaces in Fiber Reinforced Composites

Chapter 6. Interface mechanics and fracture toughness theories 277

Sakai M., Takeuchi S., Fischbach D.B. and Bradt R.C. (1988). Delamination toughening from interfacial
cracking in ceramics and ceramic composites. In Proc. Ceramic Microstructures '86 (J.A. Pask and
A.G. Evans, ed.), Plenum Press, New York, pp. 869-876.
Sato N., Kurauchi T., Sato S. and Kamigaito 0. (1983). SEM observation of the initiation and
propagation of cracks in a short fibre reinforced thermoplastic composite under stress. J. Mater. Sci.
Lett. 2, 188-190.
Sat0 N., Kurauchi T., and Kamigaito 0. (1985). In situ SEM observation of fracture in short glass fiber
reinforced thermoplastic composites. In Fracture Mechanics: Sixteenth Symposium, ASTM STP 868
(M.F. Kanninen and A.T. Hopper, eds.), ASTM, Philadelphia, PA, pp. 49L503.
Sato N., Kurauchi T., Sato, S. and Kamigaito 0. (1986). Fracture mechanism of unidirectional carbon-
fibre reinforced epoxy resin composites. J. Mater. Sci. 21, 1005-1010.
Sato N., Kurauchi T., Sato, S. and Kamigaito 0. (1988). Reinforcing mechanism by small diameter fiber
in short fiber composite. J. Composites Mater. 22, 85S873.
Sat0 N., Kurauchi T., Sato, S. and Kamigaito 0. (1991). Microfailure behaviour of randomly dispersed
short fiber reinforced thermoplastic composites obtained by direct SEM observation. J. Mater. Sci. 26,
389 1-3898.
Schultz J.M. and Friedrich K (1984). Effect of temperature and strain rate on the strength of a PET/glass
fiber composite. J. Mater. Sci. 19, 2246-2258.
Sih, G.C. and Liebowitz, H. (1968). In Fracture (H. Liebowitz ed.), Academic Press, New York, Vol. 2,
pp. 68-190.
Solar, M.A. and Relzunce, F.J. (1989). Fracture toughness and R-curves of glass fiber reinforced
polyester. Composites 20, 12CL-124.
Takahashi, K. and Choi, N.S. (1991). Influence of fiber weight fraction on failure mechanisms of
poly(ethy1ene terephthalate) reinforced by short-glass fibers. J. Mater. Sci. 26, 4648-3656.
Taya M. and Arsenault R.J. (1989). In Metal Matrix Composites - Thermomechanical Behaviour.
Pergamon Press, Oxford, pp. 940.
Tetelman A.S. (1969). Fracture process in fiber composite materials. In Composite Maierials: Testing and
Design, ASTM STP 460, ASTM, Philadelphia, PA, pp. 473-502.
Tirosh J. (1973). The effect of plasticity and crack blunting on the stress distribution in orthotropic
composite materials. ASME Trans. J. Appl. Mech. 40, 785-790.
Tohgo, K. Wang, A.S.D. and Chou, T.W. (1993). A criterion for splitting crack initiation in
unidirectional fiber-reinforced composites. J. Composite Mater. 27, 1054-1076.
Tullock, D.L., Reimanis, I.E., Graham, A.L. and Petrovic, J.J. (1994). Deflection and penetration of
cracks at an interface between two dissimilar materials. Acta Metall. Mater. 42, 3245-3252.
Voss H. and Friedrich K. (1986). Fracture and fatigue of short glass fiber reinforced PTFE composites.
J. Mater. Sci. Lett. 5, 569-572.
Warren, R. and Sarin, V.K. (1989). In Application of Fracture Mechanics to Composiie MateriaL.
Composite Materials Series, Vol. 6 (K. Friedrich ed.), Elsevier, Amsterdam, pp. 571-614.
Waddoups, M.E.. Eisenmann, J.R., Kaminski, B.E. (1971). Macroscopic fracture of advanced composite
materials. J. Composite Mater. 5, 44W57.
Wells J.K. and Beaumont P.W.R. (1982). Construction and use of toughness maps in a fracture analysis
of the micromechanisms of composite failure. In Composite Materials: Testing and Design, ASTM
STP 787 (I.M. Daniel ed.), ASTM, Philadelphia, PA, pp. 147-162.
Wells J.K. and Beaumont P.W.R. (1985). Crack tip energy absorption processes in fiber composites.
J. Mater. Sci. 20, 2735-2794.
Wells J.K. and Beaumont P.W.R. (1987). The prediction of R-curves and notched tensile strength for
composite laminates. J. Mater. Sci. 22, 1457-1468.
Williams, T., Allen, G. and Kaufman M.S. (1973). The impact strength of fibre composites. J. Mater. Sci.
8, 1765-1787.