Page 207 - Engineering Plastics Handbook

180 Engineering Plastics

35. Harris, J.E., et al., “Miscible Blends of Polyarylether Ketone and an Imide Containing
Polymer,” U.S. Patents 5,079,309 and 5,171,796, 1992.
36. Chun, Y-S., Lee, H., Kim, W., and Oh, T., “Thermal Properties and Morphology of
Blends of Polyetherimide and Polycarbonate,” Polym. Eng. & Sci., 36(20):2694–2702,
1996.
37. Sanner, M., and May, A., “Injection Molding of a High Flow PEI-Polycarbonate Ester
Blend,” 62nd SPE ANTEC, 2004, pp. 2854–2857.
38. Gunduz, N., and Gallucci, R., “Glass Filled Polycarbonate Ester-Polyetherimide
Blends,” 61st SPE ANTEC, 2003, pp. 1842–1864.
39. Lee, J. H., Lee, S-G, Choi, K-Y, and Liu, J., “Crystallization and Melting Behavior of
Nylon 6,6/ Polyetherimide Blends,” Polym. J., 30(7):531–537, 1998.
40. Choi, K-Y, Lee, S-G, and Lee, J. H., “Morphology and Dynamic Mechanical Properties
of Nylon 6,6/ Polyetherimide Blends,” Polym. Eng. Sci., 35(20):1643–1651, 1995.
41. Sepe, M. P., “The Effects of Adsorbed Moisture on Elevated Temperature
Properties of Polyetherimides,” Society of Plastics Engineers 62nd SPE ANTEC,
2004, pp. 2236–2240.
42. Pike, R. A., Pinto, J. P., and Brunett, C. M., “Moisture Effects in a Polyetherimide—
Ultem,” Society of Plastics Engineers, 2d International Conference on Polyimides,
Recent Advances in Polyimide Technology, 1985, pp. 92–101.
43. Merdas, I., Thominette, F., and Verdu, J., “Humid Aging of Polyetherimide. I. Water
Sorption Characteristics,” J. Applied Polym. Sci., 77:1439–1444, 2000.
44. Cella, J. A., “Degradation and Stability of Polyimides,” Polym. Degradation and
Stability, 36(2):99–110, 1992.
45. Perng, L. H., “Thermal Degradation Mechanism of Polyetherimide by Stepwise
Py-GC/MS,” J. Applied Polym. Sci., 79:1151–1161, 2001.
46. Torre, L., and Kenny, J. M., “Thermal Degradation Kinetics of Polyetherimide,” Society
of Plastics Engineers 55th SPE ANTEC, 1997, pp. 1728–1732.
47. Bohringer, B., Schilo, D., Birkenfeld W., and Odenthal, W., “New Filaments and Fiber
of Polyetherimide,” Chemiefaserm/Textilindustrie (CTI), 41/93:T12–T16, 1991.
48. Song, S. S., White, J. L., and Cakmak, M., “Melt Spinning of Polyetherimide and
Polyarylate Fiber,” 48th SPE ANTEC, 1990, pp. 1657–1661.
49. Modern Plastics, January 2001, pp. 45–47.
50. Krutchen, C. M., and Wu, W-P, Low-density foams, U.S. Patents 4,594,208 (1986),
4,535,100 (1985), 4,532,263 (1985), and 4,532,094 (1985).
51. Niznik, G. E., High-density foams, U.S. Patents 4,163,037 (1979) and 4,097,425 (1978).
52. Bloomfield, R., Crossman, D., and Raeissi, A., “Using Polyetherimide Thermoplastic
for Forward Lighting Complex Reflectors,” Society of Automotive Engineers, Paper no.
1999-01-1213.
53. Porta, G. M., Foust, D. F., Burrell, M. C., and Karas, B. R., “Vacuum Metallization of
Polyetherimide: Interfacial Chemistry and Adhesion,” Polym. Eng. & Sci., 32(15):
1021–1027, 1992.
54. Johnson, R. O., and Jafry, S., “Ultem Polyetherimide Resin for the Medical
Industry,” Medical Design and Manufacturing Conference Proceedings II, June 2, 1998,
pp. 203–33 to 203–37.