Page 80 - Environmental Control in Petroleum Engineering
P. 80
Drilling and Production Operations 67
Cornwall, J. R., "Road Mixing Sand Produced from Steam Drive Operations,"
paper SPE 25930 presented at the Society of Petroleum Engineers/
Environmental Protection Agency's Exploration and Production Environ-
mental Conference, San Antonio, TX, March 7-10, 1993.
Deeley, G, M., "Use of MINTEQ for Predicting Aqueous Phase Trace Metal
Concentrations in Waste Drilling Fluids," Proceedings of the U.S. Environ-
mental Protection Agency's First International Symposium on Oil and Gas
Exploration and Production Waste Management Practices, New Orleans,
LA, Sept. 10-13, 1990, pp. 1013-1023.
Deuel, L. E,, "Evaluation of Limiting Constituents Suggested for Land
Disposal of Exploration and Production Wastes," Proceedings of the U.S.
Environmental Protection Agency's First International Symposium on Oil
and Gas Exploration and Production Waste Management Practices, New
Orleans, LA, Sept. 10-13, 1990, pp. 411-430.
Deuel, L. E. and Holliday, G. H., "Reserve Pit Drilling Wastes—Barium and
Other Metal Distributions of Oil Gas Field Wastes," paper SPE 20712
presented at the Society of Petroleum Engineers 65th Annual Technical
Conference and Exhibition, New Orleans, LA, Sept. 23-25, 1990.
Enright, D. P. and Smith, F. M., "An Environmentally Safe Water-Based
Alternative to Oil Muds," paper SPE/IADC 21937 presented at the Society
of Petroleum Engineers 1991 Drilling Conference, Amsterdam, The
Netherlands, March 11-14, 1991.
Fang, C. S., Tong, N. A. M., and Lin, J. H., "Removal of Emulsified Crude
Oil from Produced Water by Electrophoresis," paper SPE 21047 presented
at the Society of Petroleum Engineers International Symposium on Oilfield
Chemistry, Anaheim, CA, Feb. 20-22, 1991.
Farrell, C. W., "Oilfield Process Stream Treatment by Means of Alternating
Current Electrocoagulation," Advances in Filtration and Separation Tech-
nology, Vol. 3: Pollution Control Technology for Oil and Gas Drilling and
Production Operations, American Filtration Society, Houston: Gulf Publish-
ing Co.-, 1991, pp. 186-207.
Friedheim, J. E. and Shinnie, J. R., "New Oil-Base Mud Additive Reduces
Oil Discharged on Cuttings," paper SPE/IADC 21941 presented at the
Society of Petroleum Engineers 1991 Drilling Conference, Amsterdam, The
Netherlands, March 11-14, 1991.
Gray, P. R,, "NORM Contamination in the Petroleum Industry," /. Pet. Tech.,
Jan. 1993, pp. 12-16.
Grizzle, P. L., "Hydrocarbon Emission Estimates and Controls for Natural
Gas Glycol Dehydration Units," paper SPE 25950 presented at the Society
of Petroleum Engineers/Environmental Protection Agency's Exploration and
Production Environmental Conference, San Antonio, TX, March 7-10,
1993.