Page 157 - Finite Element Modeling and Simulations with ANSYS Workbench
P. 157
142 Finite Element Modeling and Simulation with ANSYS Workbench
Click Plan View on the toolbar to view the sketch grid head-on.
Click Sketch Mode on the Design tab to begin a sketch. Click on the Line icon.
Draw two lines as shown below. To draw a line, click a start point and then an
end point in the sketch grid. Here for convencience, you may click a point and
then enter a distance value to create a line. Click Point 1, drag honrizontally,
and enter 40 in the distance box to draw the 1st line. Click Point 3, drag hon-
rizontally, and enter 40 in the distance box to draw the 2nd line. When neces-
sary, press the Esc key to end the line creation.
