Page 371 - Finite Element Modeling and Simulations with ANSYS Workbench
P. 371
356 Finite Element Modeling and Simulation with ANSYS Workbench
In the Details of Inlet in Default Domain in Flow Analysis 1, select the face
highlighted below for the Location of the inlet under the tab of Basic Settings.
To select a face, click the Selection Button to the right of the Location field
to display the Selection Dialog Panel. Click each face in the panel until the
desired face is highlighted, and click Ok to close the panel.
Click on the Boundary Details tab, and set the Normal Speed to 40 [Km Hr^-1].
Click OK.
