Page 411 - Finite Element Modeling and Simulations with ANSYS Workbench
P. 411
396 Finite Element Modeling and Simulation with ANSYS Workbench
The curves will turn into the following sketch. Note that there are still short lines
in between points 1 and 2, points 3 and 4, and points 5 and 6, which we need
to repair further.
Click on the Trim Away icon under the Design tab. In the Graphics Window,
click on the line segments in between points 1 and 2, 3 and 4, and 5 and 6, to
trim them away, as shown below.
