Page 413 - Finite Element Modeling and Simulations with ANSYS Workbench
P. 413
398 Finite Element Modeling and Simulation with ANSYS Workbench
Click on the Create Rounded Corner icon under the Design tab. Click each pair
of adjacent lines to create a rounded corner with 2mm radius, as shown below.
Note that the line segments a, b, c and d may not be long enough to accommo-
date this fillet radius.
To fix that, the 4 line segments (a, b, c and d) may need to be extended. Click
the Create Corner icon under the Design tab to create two corners between
the 4 lines. To create a corner, click one side and then the adjacent side in the
Graphics Window.
