Page 64 - Finite Element Modeling and Simulations with ANSYS Workbench

Bars and Trusses 49

In the Driving Dimensions folder showing up next, click on B to bring up its
default Ruler dimension value. Click on the default Ruler dimension value,
and change it to 0.06m. Repeat the same step for H, and change the Ruler
dimension value for H to 0.06m as shown below in the Type column. Close the
SYS tab to return back to the Graphics Window for sketch modeling.

Step 7: Assign Cross Section to Line Sketch
Click Select on the Design tab, and select all 13 Lines under the Curves folder in
the Structure Tree. To select all lines in the tree, click the first Line in the struc-
ture tree, and hold the Shift key and click the last Line. The selected lines will
be highlighted in yellow as shown below.