Page 69 - Finite Element Modeling and Simulations with ANSYS Workbench

54 Finite Element Modeling and Simulation with ANSYS Workbench

Step 11: Apply Boundary Conditions
Right-click on Static Structural (A5) in the Project Outline, and select Insert
and then Fixed Support. A Fixed Support item will be added underneath
Static Structural (A5) in the Project Outline.

Click on the Vertex filter icon to enable point selection, and select the two points
as shown below in the Graphics Window. In the Details of “Fixed Support”,
click Apply to confirm on the Geometry selection. After completion, a Fixed
Support boundary condition will be added to the selected two points.