Page 233 - T. Anderson-Fracture Mechanics - Fundamentals and Applns.-CRC (2005)

1656_C004.fm Page 213 Thursday, April 21, 2005 5:38 PM

Dynamic and Time-Dependent Fracture 213

REFERENCES

1. Freund, L.B., “Dynamic Crack Propagation.” The Mechanics of F racture, American Society of
Mechanical Engineers, New York, 1976, pp. 105–134.
2. Freund, L.B., “Crack Propagation in an Elastic Solid Subjected to General Loading—I. Constant Rate
of Extension.” Journal of the Mechanics and Physics of Solids, Vol. 20, 1972, pp. 129–140.
3. Freund, L.B., “Crack Propagation in an Elastic Solid Subjected to General Loading—II. Non-Uniform
Rate of Extension.” Journal of the Mechanics and Physics of Solids, Vol. 20, 1972, pp. 141–152.
4. Freund, L.B., “Crack Propagation in an Elastic Solid Subjected to General Loading—III. Stress Wave
Loading.” Journal of the Mechanics and Physics of Solids, Vol. 21, 1973, pp. 47–61.
5. Freund, L.B., Dynamic Fracture Mechanics, Cambridge University Press, Cambridge, UK, 1990.
6. Kanninen, M.F. and Poplar, C.H., Advanced Fracture Mechanics, Oxford University Press, New York,
1985.
7. Rose, L.R.F., “Recent Theoretical and Experimental Results on Fast Brittle Fracture.” International
Journal of Fracture, Vol. 12, 1976, pp. 799–813.
8. Atkinson, C. and Eshlby, J.D., “The Flow of Energy into the Tip of a Moving Crack.” International
Journal of Fracture Mechanics, Vol. 4, 1968, pp. 3–8.
9. Sih, G.C., “Dynamic Aspects of Crack Propagation.” Inelastic Behavior of Solids, McGraw-Hill,
New York, 1970, pp. 607–633.
10. Freund, L.B., “Energy Flux into the Tip of an Extending Crack in an Elastic Solid.” Journal of
Elasticity, Vol. 2, 1972, pp. 341–349.
11. Moran, B. and Shih, C.F., “A General Treatment of Crack Tip Contour Integrals.” International Journal
of Fracture, Vol. 35, 1987, pp. 295–310.
12. Atluri, S.N., “Path-Independent Integrals in Finite Elasticity and Inelasticity, with Body Forces, Inertia,
and Arbitrary Crack Face Conditions.” Engineering Fracture Mechanics, Vol. 16, 1982, pp. 341–369.
13. Kishimoto, K., Aoki, S., and Sakata, M., “On the Path-Independent J Integral.” Engineering Fracture
Mechanics, Vol. 13, 1980, pp. 841–850.
14. E 23-88, “Standard Test Methods for Notched Bar Impact Testing of Metallic Materials.” American
Society for Testing and Materials, Philadelphia, PA, 1988.
15. Joyce, J.A. and Hacket, E.M., “Dynamic J-R Curve Testing of a High Strength Steel Using the
Multispecimen and Key Curve Techniques.” ASTM STP 905, American Society for Testing and
Materials, Philadelphia, PA, 1984, pp. 741–774.
16. Joyce, J.A. and Hacket, E.M., “An Advanced Procedure for J-R Curve Testing Using a Drop Tower.”
ASTM STP 995, American Society for Testing and Materials, Philadelphia, PA, 1989, 298–317.
17. Duffy, J. and Shih, C.F., “Dynamic Fracture Toughness Measurement Methods for Brittle and Ductile
Materials.” Advances in Fracture Research: Seventh International Conference on Fracture, Pergamon
Press, Oxford, 1989, pp. 633–642.
18. Nakamura, T., Shih, C.F., and Freund, L.B., “Analysis of a Dynamically Loaded Three-Point-Bend
Ductile Fracture Specimen.” Engineering Fracture Mechanics, Vol. 25, 1986, pp. 323–339.
19. Nakamura, T., Shih, C.F., and Freund, L.B., “Three-Dimensional Transient Analysis of a Dynamically
Loaded Three-Point-Bend Ductile Fracture Specimen.” ASTM STP 995, Vol. I, American Society for
Testing and Materials, Philadelphia, PA, 1989, pp. 217–241.
20. Rice, J.R., Paris, P.C., and Merkle, J.G., “Some Further Results of J-Integral Analysis and Estimates.”
ASTM STP 536, American Society for Testing and Materials, Philadelphia, PA, 1973, pp. 231–245.
21. Barsom, J.M., “Development of the AASHTO Fracture Toughness Requirements for Bridge Steels.”
Engineering Fracture Mechanics, Vol. 7, 1975, pp. 605–618.
22. Mott, N.F., “Fracture of Metals: Theoretical Considerations.” Engineering, Vol. 165, 1948, pp. 16–18.
23. Yoffe, E.H., “The Moving Griffith Crack.” Philosophical Magazine, Vol. 42, 1951, pp. 739–750.
24. Broberg, K.B., “The Propagation of a Brittle Crack.” Arkvik for Fysik, Vol 18, 1960, pp. 159–192.
25. Craggs, J.W., “On the Propagation of a Crack in an Elastic-Brittle Material.” Journal of the Mechanics
and Physics of Solids, Vol. 8, 1960, pp. 66–75.
26. Stroh, A.N., “A Simple Model of a Propagating Crack.” Journal of the Mec hanics and Physics of
Solids, Vol. 8, 1960, pp. 119–122.
27. Dulaney, E.N. and Brace, W.F., “Velocity Behavior of a Growing Crack.” Journal of Applied Physics,
Vol. 31, 1960, pp. 2233–2236.