Page 109 - Fundamentals of Enhanced Oil and Gas Recovery

97
Enhanced Oil Recovery Using CO 2

[35] W.R. Brock, L.A. Bryan, Summary Results of CO 2 EOR Field Tests, 1972 1987, Society of
Petroleum Engineers, Denver, CO, 1989.
[36] C. Gao, X. Li, L. Guo, F. Zhao, Heavy oil production by carbon dioxide injection, Greenhouse
Gases Sci. Technol. 3 (2013) 185 195.
[37] R. Simon, D. Graue, Generalized correlations for predicting solubility, swelling and viscosity behav-
ior of CO 2 crude oil systems, J. Petrol. Technol. 17 (1965) 102 106.
[38] C.A. Mulliken, S.I. Sandler, The prediction of CO 2 solubility and swelling factors for enhanced oil
recovery, Indus. Eng. Chem. Process Design Develop. 19 (1980) 709 711.
[39] A.K. Mehrotra, W.Y. Svrcek, Correlations for properties of bitumen saturated with CO 2 ,CH 4 and
N 2 , and experiments with combustion gas mixtures, J. Can. Petrol. Technol. 21 (1982).
[40] F.T. Chung, R.A. Jones, H.T. Nguyen, Measurements and correlations of the physical properties of
CO 2 heavy crude oil mixtures, SPE Reservoir Eng. 3 (1988) 822 828.
[41] M. Emera, H. Sarma, Prediction of CO 2 solubility in oil and the effects on the oil physical proper-
ties, Energy Sources A 29 (2007) 1233 1242.
[42] A. Rostami, M. Arabloo, A. Kamari, A.H. Mohammadi, Modeling of CO 2 solubility in crude oil
during carbon dioxide enhanced oil recovery using gene expression programming, Fuel 210 (2017)
768 782.
[43] J.R. Welker, Physical properties of carbonated oils, J. Petrol. Tech. 15 (1963) 873 875.
[44] D.-Y. Peng, D.B. Robinson, A new two-constant equation of state, Indus. Eng. Chem. Fund. 15
(1976) 59 64.
[45] B. Habermann, The efficiency of miscible displacement as a function of mobility ratio, Trans.
AIME 219 (1960) 264 272.
[46] B.L. O’Steen, E.T.S. Huang, Effect of solvent viscosity on miscible flooding, SPE J. 7 (1992) 213 218.
[47] B. Habermann, The efficiency of miscible displacement as a function of mobility ratio, Petrol,
Trans. AIME 219 (1960) 264 272.
[48] A. Emadi, M. Jamiolahmady, M. Sohrabi, S. Irland, Visualization of Oil Recovery by CO 2 -Foam
Injection; Effect of Oil Viscosity and Gas Type, Society of Petroleum Engineers, Tulsa, OK, 2012.
[49] G. Glatz, A primer on enhanced oil recovery, Physics 240 (2013).
[50] H.D. Beggs, J. Robinson, Estimating the viscosity of crude oil systems, J. Petrol. Technol. 27 (1975)
1,140 141.
[51] E. Lederer, Viscosity of mixtures with and without diluents, Proc. World Pet. Cong. Lond. 2
(1933) 526 528.
[52] I.M. Mohamed, J. He, H.A. Nasr-El-Din, Permeability Change during CO2 Injection in
Carbonate Aquifers: Experimental Study, Society of Petroleum Engineers, Houston, TX, 2011.
[53] T.B. Reid, H.J. Robinson, Lick creek meakin sand unit immiscible CO 2 waterflood project, J. Pet.
Technol. 33 (1981) 1723 1729.
[54] S. Sahin, U. Kalfa, D. Celebioglu, Bati Raman field immiscible CO 2 application—status quo and
future plans, SPE Reserv. Eval. Eng. 11 (4) (2008) 778 791.
[55] W. Saner, J. Patton, CO 2 recovery of heavy oil: Wilmington field test, J. Petrol. Technol. 38 (1986)
769 776.
[56] L.J. Mohammed-Singh, K. Ashok, Lessons from Trinidad’s CO 2 immiscible pilot projects
1973 2003, in: IOR 2005-13th European Symposium on Improved Oil Recovery, 2005.
[57] E. Leissner, Five-spot vs. crestal waterflood patterns, comparison of results in thin reservoirs, J.
Petrol. Technol. 12 (1960) 41 44.
[58] H. Warner Jr, E. Holstein, Immiscible gas injection in oil reservoirs, in: E.D. Holstein (Ed.),
Reservoir Engineering and Petrophysics: Petroleum Engineering Handbook, Society of Petroleum
Engineering, Richardson, TX, 2007, pp. 1103 1147.
[59] J. Casteel, N. Djabbarah, Sweep improvement in CO 2 flooding by use of foaming agents, SPE
Reservoir Eng. 3 (1988). 1,186-181,192.
[60] R. Ehrlich, J.H. Tracht, S.E. Kaye, Laboratory and field study of the effect of mobile water on
CO 2 -flood residual oil saturation, J. Petrol. Technol. (October, 1984) 1797 1809.
[61] D.L. Tiffin, W.F. Yellig, Effects of mobile water on multiple-contact miscible gas displacements, SPE
J. 23 (1983) 447 455.