Page 685 - Handbook of Thermal Analysis of Construction Materials
P. 685

References                                                    653


                               15. Trehan, R., and Kad, G. L., Thermal Analysis of Intumescent Coating
                                   System Based upon Cellulose and Ammonium Polyphosphate, J. Polym.
                                   Mater., 11(4):289–293 (1994)
                               16. British Standards 476 Part 20 (1987)
                               17. Camino, G., Costa, L., and Trossarelly, L., Polym. Deg. Stab.,  12:203
                                   (1985)
                               18. Jain, R. K., Lal, K., Bhatnagar, H. L., J. Indian Chem. Soc., 57:620 (1980)
                               19. Taylor, A. P., and Sall, F. R., Thermal Analysis of Intumescent Coatings,
                                   European Polymers Paint Colour J., 182(4301):122,124–125,130 (1992)
                               20. Meyer, E. F., Michalski, C. R., Bender, L. M., Burke, S. M., and Morris, E.
                                                                                th
                                   E., MTDSC Applications in Coatings R&D, Proc. 26  Conf. of the N.
                                   Am. Thermal Analysis Soc.,  Cleveland, OH,  (K. R. Williams, ed.), pp.
                                   634–639 (Sept. 13–15, 1998)
                               21. Chang, E. P., Recrystallization of Silicone Release Coatings, Polym. Bull.
                                   26:681–688 (1991)
                               22. Neag, M., Floyd, L., and Manzuk, S., The Application of Thermogravimetry
                                   to the Service Life Prediction of Coatings, Polymeric Materials: Science
                                   and Engineering, Proc. ACS Div. Polym. Mater. Sci. Engin., 68:331–333
                                   (1983)
                               23. Prime, R. B., Thermosets, Thermal Characterization of Polymeric Materials,
                                   pp. 478–480, Academic Press (1981)
                               24. Flynn, J. H., et al., Polym. Lett., B4:323 (1966)
                               25. Toop, D. J., IEEE Trans. Elec. Ins., EI-6–2 (1971)
                               26. Grentzer, T. H., Holsworth, R. M., and Provder, T., The Application of the
                                   Dynamic Mechanical Analyzer to Organic Coatings, Polym. Preprints,
                                   22(1):254–255 (1981)
                               27. Hill, L. W., Korzeniowski, H. M., Ojunga-Andrew, M., and Wilson, R.
                                   C., Accelerated Clearcoat Weathering Studied by Dynamic Mechanical
                                   Analysis, Progr. in Organic Coatings, 24:147–173 (1994)
                               28. Hosoya, T., Nonaka, T., and Masude, S., Analysis of Transmission
                                   Characteristics of Dual Coated Fiber by Dynamic Mechanical Method,
                                   Inst. of Elect. Eng., Conf. Publ., London, England, pp. 522–525 (1964)
                               29. Scanlan, J. C., Webster, D. C., Crain, A. L., Correlation between Network
                                   Mechanical Properties and Physical Properties in Polyester-Urethane
                                   Coatings (R. R. Gould, ed.), ACS Symp. Series, No. 648:222–234 (1996)
                               30. Frey, T., Große-Brinkhaus, K. H., and Röckrath, V., Cure Monitoring of
                                   Thermoset Coatings, Progr. in Organic Coatings, 27:59–66 (1996)
                               31. Slikkerveer, P. J., van Dongen, M. H. A, and Touwslager, F. J.,  Erosion
                                   of Elastomeric Protective Coatings, Wear 236:189–198 (1999)
   680   681   682   683   684   685   686   687   688   689   690