Page 4 - Injection Molding Advanced Troubleshooting Guide

The Authors:
Randy Kerkstra, Hudsonville, MI; info@kbmoldingsolutions.com
Steve Brammer, Holland, MI; info@kbmoldingsolutions.com

Distributed in the Americas by:
Hanser Publications
6915 Valley Avenue, Cincinnati, Ohio 45244-3029, USA
Fax: (513) 527-8801
Phone: (513) 527-8977
www.hanserpublications.com
Distributed in all other countries by:
Carl Hanser Verlag
Postfach 86 04 20, 81631 München, Germany
Fax: +49 (89) 98 48 09
www.hanser-fachbuch.de
The use of general descriptive names, trademarks, etc., in this publication, even if the former are not especially
identified, is not to be taken as a sign that such names, as understood by the Trade Marks and Merchandise Marks
Act, may accordingly be used freely by anyone. While the advice and information in this book are believed to be true
and accurate at the date of going to press, neither the authors nor the editors nor the publisher can accept any legal
responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied,
with respect to the material contained herein.
The final determination of the suitability of any information for the use contemplated for a given application
remains the sole responsibility of the user.

Cataloging-in-Publication Data is on file with the Library of Congress

All rights reserved. No part of this book may be reproduced or transmitted in any form or by any means, electronic
or mechanical, including photocopying or by any information storage and retrieval system, without permission in
writing from the publisher.
© Carl Hanser Verlag, Munich 2018
Editor: Dr. Mark Smith
Production Management: Jörg Strohbach
Coverconcept: Marc Müller-Bremer, www.rebranding.de, München
Coverdesign: Stephan Rönigk
Typesetting: Kösel Media GmbH, Krugzell
Printed and bound by Printed and bound by Druckerei Hubert & Co GmbH und Co KG BuchPartner, Göttingen
Printed in Germany
ISBN: 978-1-56990-645-3
E-Book ISBN: 978-1-56990-646-0