Page 329 - Introduction to Petroleum Engineering
P. 329

REFERENCES                                                      319
            Craft, B.C. and M.F. Hawkins, revised by R.E. Terry (1991): Applied Petroleum Reservoir
              Engineering, Second Edition, Englewood Cliffs, NJ: Prentice‐Hall.
            Dahlberg, E.C. (1975): “Relative Effectiveness of Geologists and Computers in Mapping
              Potential Hydrocarbon Exploration Targets,” Mathematical Geology, 7, 373–394.
            Dake, L.P. (2001):  The Practice of Reservoir Engineering, Revised Edition, Amsterdam:
              Elsevier.
            Dandekar, A.Y. (2013): Petroleum Reservoir Rock and Fluid Properties, Second Edition, Boca
              Raton, FL: CRC Press.
            Denehy, D. (2011):  Fundamentals of Petroleum, Fifth Edition,  Austin,  TX: Petroleum
              Extension Service (PETEX).
            Donnely, J. (September 2014): “Community Engagement,” Journal of Petroleum Technology,
              66 (9), 18.
            Dorn, G.A. (September 1998): “Modern 3‐D Seismic Interpretation,” The Leading Edge, 17,
              Tulsa, OK: Society of Exploration Geophysicists, 1262–1283.
            van Dyke, K. (1997): Fundamentals of Petroleum, Fourth Edition, Austin, TX: Petroleum
              Extension Service (PETEX).
            Earlougher, R.C., Jr. (1977):  Advances  in Well Test Analysis, Richardson,  TX: Society of
              Petroleum Engineers.
            Ebanks, W.J., Jr. (1987): “Flow Unit Concept – Integrated Approach to Reservoir Description
              for Engineering Projects,” paper presented at the AAPG Annual Meeting, Los Angeles,
              CA, USA, AAPG Bulletin, 71 (5), 551–552.
            Ebanks, W.J., Jr., M.H. Scheihing, and C.D. Atkinson (1993): “Flow Units for Reservoir
              Characterization,”  Development Geology Reference Manual, Edited by D. Morton‐
              Thompson and A.M. Woods, AAPG Methods in Exploration Series, Number 10, Tulsa,
              OK: American Association of Petroleum Geologists, pp. 282–285.
            Economides, M.J., A.D. Hill, C. Ehlig‐Economides, and D. Zhu (2013): Petroleum Production
              Systems, Second Edition, Upper Saddle River, NJ: Prentice‐Hall.
            Ertekin, T., J.H. Abou‐Kassem, and G.R. King (2001): Basic Applied Reservoir Simulation,
              Richardson, TX: Society of Petroleum Engineers.
            Fancher, G.H. and J.A. Lewis (1933): “Flow of Simple Fluids through Porous Materials,”
              Industrial & Engineering Chemistry, 25, 1139–1147.
            Fanchi, J.R. (1990): “Calculation of Parachors for Compositional Simulation: An Update,”
              Society of Petroleum Engineers Reservoir Engineering, 5 (3), 433–436.
            Fanchi, J.R. (2004):  Energy:  Technology and Directions for the Future, Boston, MA:
              Elsevier‐Academic Press.
            Fanchi, J.R. (2006): Math Refresher for Scientists and Engineers, Third Edition, New York:
              John Wiley & Sons.
            Fanchi, J.R. (2009): “Embedding a Petroelastic Model in a Multipurpose Flow Simulator to
              Enhance the Value of 4D Seismic,” SPE Reservoir Simulation Symposium, the Woodlands,
              TX, USA, February 2–4, 2009, subsequently published in SPE Reservoir Evaluation and
              Engineering Journal, 13 (February 2010), 37–43.
            Fanchi, J.R. (2010): Integrated Reservoir Asset Management, Burlington, MA: Elsevier‐Gulf
              Professional Publishing.
            Fanchi, J.R. (2011a): “Flow Modeling  Workflow: I. Green Fields,”  Journal of Petroleum
              Science and Engineering 79, 54–57.
   324   325   326   327   328   329   330   331   332   333   334