Page 331 - Introduction to Petroleum Engineering
P. 331

REFERENCES                                                      321
            Hornbach, M.J., H.R. DeShon, W.L. Ellsworth, B.W. Stump, C. Hayward, C. Frohlich, H.R.
              Oldham, J.E. Olson, M.B. Magnani, C. Brokaw, and J.H. Luetgert (2015): “Causal Factors
              for Seismicity near Azle, Texas,” Nature Communications, 6, 6728.
            Horne, R.N. (1995): Modern Well Test Analysis, Palo Alto, CA: Petroway.
            Hubbert, M.K. (1956): “Nuclear Energy and the Fossil Fuels,” American Petroleum Institute
              Drilling and Production Practice, Proceedings of the Spring Meeting, San  Antonio,
              pp. 7–25.
            Hyne,  N.J.  (2012):  Nontechnical  Guide  to  Petroleum  Geology,  Exploration,  Drilling  &
              Production, Third Edition, Tulsa, OK: PennWell.
            IER Levelized Costs, 2011, “Levelized Cost of New Electricity Generating Technologies,”
              Annual Energy Outlook, http://instituteforenergyresearch.org/analysis/levelized‐cost‐of‐
              new‐electricity‐generating‐technologies/, accessed June 4, 2012.
            Jacobs, T. (2014): “Studying the Source of Methane Migration into Groundwater,” Journal of
              Petroleum Technology, 66 (12), 42–51.
            Jenkins,  C.,  D.  Freyder,  J.  Smith, and  G.  Starley  (2007):  “Chapter  6:  Coalbed Methane”
              Petroleum  Engineering  Handbook,  Volume  6:  Emerging  and Peripheral  Technologies,
              Edited by H.R. Warner, Jr., Richardson, TX: Society of Petroleum Engineers; Editor‐In‐
              Chief L.W. Lake.
            Johnston, D.C. (2006): “Stretched Exponential Relaxation Arising from a Continuous Sum of
              Exponential Decays,” Physical Review B, 74, 184430.
            Johnston, D.H., Editor (2010): Methods and Applications in Reservoir Geophysics, Tulsa, OK:
              Society of Exploration Geophysics.
            Kelkar, M. (2000): “Application of Geostatistics for Reservoir Characterization – Accomplish
              ments and Challenges,” Journal of Canadian Petroleum Technology, 59, 25–29.
            King, G.R. (2012): “Hydraulic Fracturing 101: What Every Representative, Environmentalist,
              Regulator, Reporter, Investor, University Researcher, Neighbor and Engineer Should Know
              About Estimating Frac Risk and Improving Frac Performance in Unconventional Gas and
              Oil Wells,” Paper SPE 152596, first presented at the SPE Hydraulic Fracturing Technology
              Conference, February 6–8, 2012, The Woodlands, TX, USA.
            King, G.R.,  W. David,  T.  Tokar,  W. Pope, S.K. Newton, J.  Wadowsky, M.A.  Williams,
              R.  Murdoch, and M. Humphrey (April 2002): “Takula Field: Data  Acquisition,
              Interpretation, and Integration for Improved Simulation and Reservoir Management,” SPE
              Reservoir Evaluation & Engineering, 5 (2), 135–145.
            Kuuskraa, V.A. and C.F. Brandenburg (October 1989): “Coalbed Methane Sparks a New
              Energy Industry,” Oil & Gas Journal, 87 (41), 49.
            Kuuskraa, V.A. and G.C. Bank (December 2003): “Gas from Tight Sands, Shales a Growing
              Share of U.S. Supply,” Oil & Gas Journal, 101 (47), 34–43.
            Lake, L.W. (1989): Enhanced Oil Recovery, Englewood Cliffs, NJ: Prentice Hall.
            Lake, L.W. and J.L. Jensen (1989): “A Review of Heterogeneity Measures Used in
              Reservoir Characterization,” Paper SPE 20156, Richardson, TX: Society of Petroleum
              Engineers.
            Lee, J. (2007): “Chapter 8: Fluid Flow through Permeable Media,” Petroleum Engineering
              Handbook, Volume 5: Reservoir Engineering and Petrophysics, Edited by E.D. Holstein,
              Richardson, TX: Society of Petroleum Engineers; Editor‐In‐Chief L.W. Lake.
            Levin, H.L. (1991): The Earth Through Time, Fourth Edition, New York: Saunders College
              Publishing.
   326   327   328   329   330   331   332   333   334   335   336