Page 484 - Marine Structural Design

460 Part IVShvcturaI Reliability

8. Guedes Soares C., (1990), “Stochastic Models of Loads Effects for the Preliminary
Ship Hulls”, Structural Safety 1990; 8: 353-368.
9. Guedes Soares, C. and Moan, T., 1985, “Uncertainty Analysis and Code Calibration of
the Primary Load Effects in Ship Structures”, Proc., 4th International Conference on
Structural Safety and Reliability (ICOSSAR ‘85), Kobe, Japan, Vol. 3, pp. 501-5 12.
10. Guedes Soares, C. and Moan, T., 1988, “Statistical Analysis of Still-water Load
Effects in Ship Structures”, Trans. SNAME, Vol. 96, pp. 129-156.
11. Guedes Soares, C., Dogliani, M., Ostergaard, C., Parmentier, G. and Terndrup
Pedersen, P., (1996), “Reliability Based Ship Structural Design”, SNAME
Transactions, Vol. 104, pp.357-389.
12. Guedes Soares, C., Garbatov, Y., (1999), “Reliability of Corrosion Protected and
Maintained Ship Hulls subjected to Corrosion and Fatigue”, Journal of Ship Research
Vol. 43(2), pp.65-78.
13. Guedes Soares, C., Garbatov, Y., (1999), “Reliability of Maintained, Corrosion
Protected Plates subjected to Nonlinear Corrosion and Compressive Loads”, Journal of
Marine Structures, Vol. 12, pp.425-445.
14. IACS (1995), “Requirement Sll, Longitudinal Strength Standards”, Int. Association of
Classification Societies.
15. Liu, Y.W., Moses, F. (1994), “A Sequential Response Surface Method and Its
Application in the Reliability Analysis of Aircraft Structural System”, Journal of
Structural Safety, Vol. 16, pp. 36-46.
16. Mansour, A.E. (1972), “Probiblastic Design Concept in Ship Structural Safety and
Reliability”, Trans. SNAME, Vol. 80, pp. 64-97.
17. Mansour, A. and Faulkner, D. (1973), “On Applying the Statistical Approach to
Extreme Sea Loads and Ship Hull Strength”, RINA Trans., Vol. 115, pp. 277-313.
18. Mansour, A.E., (1 974), “Approximate Probabilistic Methods of Calculating Ship
Longitudinal Strength”, Journal of Ship Research, Vol. 18.
19. Mansour, A.E., (1987), “Extreme Value Distributions of Wave Loads and Their
Application to Marine Structures”, Marine Structural Reliability Symposium,
Arlington, VA.
20. Mansour, A.E. (1990), “An Introduction to Structural Reliability Theory”, SSC Report
ssc-351.
21. Mansour,, A.E., Lin, M., Hovem, L., and Thayamballi, A. (1993), “Probability-Based
Ship Design Procedure - A Demonstration”, SSC Report, SSC-368.
22. Mansour A E. (1994), “Probability Based Ship Design Procedures: Loads and Load
Combination”, Ship Structure Committee, SSC-373.
23. Mansour, A.E. (1995), “Extreme Loads and Load Combination”, J. of Ship Research,
Vol. 39, No. 1.
24. Mansour7 A. E. and Wirsching, P.H. (1995), “Sensitivity Factors and Their Application
to Marine Structures”, Journal of Marine Structures, Vol. 8.