Page 205 - Mechatronic Systems Modelling and Simulation with HDLs

194 LITERATURE

[73] Cohen, B. (1995), VHDL Coding Styles and Methodologies, Kluwer Aca-
demic Publishers.
[74] Comerford, R. (1994), Mecha... what?, IEEE Spectrum 31, 46–9.
[75] Crandall, S. H., Karnopp, D. C., Kurtz, E. F. and Pridmore-Brown, D. C.
(1968), Dynamics of Mechanical and Electromechanical Systems,McGraw-
Hill.
[76] Crary, S.andKota, S.(1990),Conceptualdesignofmicro-electro-mechanical
systems, International Conference on Micro System Technologies, 17–22.
[77] Damm, W., Eckrich, M., Brockmeyer, U., Wittich, G. and Holberg, H. J.
(1997), Einsatz formaler Methoden zur Erh¨ ohung der Sicherheit eingebet-
teter Systeme im Kfz, Tagung Systemengineering in der KFZ-Entwicklung,
VDI-Bereicht 1374, 349–66.
[78] Dammers, D., Binet, P., Pelz, G. and Voßk¨ amper, L. (2001), Motor mod-
eling based on physical effect models, IEEE International Workshop on
Behavioral Modeling and Simulation (BMAS).
[79] Dankert, H. and Dankert, J. (1995), Technische Mechanik, B.G.Teubner
Verlag.
[80] Daponte, P., Grimaldi, D. and Savastano, M. (1992), Simulation tools
for electrical networks: comparison among existing methodologies, Proc.
EUROSIM ’92, 441–449.
[81] Deegener, M. and Huss, S. A. (1993), A simulation technique for inter-
acting software — hardware descriptions of automotive systems, European
Simulation Symposium 5, 565–70.
[82] Deiss, H. and Krimmel, H. (1997), Hardware-in-the-Loop Simulation der
Spezifikation, Mechatronik im Maschinen- und Fahrzeugbau, VDI-Berichte
1315, 103–16.
[83] Donges, E., and Naab, K. (1996), Regelsysteme zur Fahrzeugf¨ uhrung und
-stabilisierung in der Automobiltechnik, at Automatisierungstechnik 44,
226–36.
[84] Donnelly, M. Siegel, C. and Witt, D. (1994), Design analysis of an
electronically-controlled hydraulic braking system using the saber
simulator, SAE technical paper 940182.
[85] Dorn, R., Pretschner, A. and Schulze, K.-P. (1996), Ein Beitrag zur Mod-
ellierung und Simulation mechatronischer Systeme, Mess- und Automa-
tisierungstechnik, VDI-Berichte 1282, 345–55.
[86] D¨ otzel, W. and Billep, D. (1995), Entwurf der Mikromechanischen Kom-
ponenten f¨ ur Sensor- und Aktor-Arrays, me, 24–27.
[87] Dudaicevs, H., Kandler, M. and Mokwa, W. (1992), Ober߬ achen-
mikromechanik f¨ ur die Herstellung von Silizium-Drucksensoren, VDI
Berichte—Sensoren: Technologie und Anwendung, 161–6.
[88] Dudaicevs, H., Manoli, Y., Mokwa, W., Schmidt, M. and Spiegel, E. (1995),
A fully integrated surface micromachined pressure sensor with low temper-
ature dependence, Proc. Transducers, 616–9.