Page 206 - Mechatronic Systems Modelling and Simulation with HDLs

LITERATURE 195

[89] Duttlinger, G. and Filsinger, R. (1990), Adaptives D¨ ampfungssystem, Elek-
tronik im Kraftfahrzeug, VDI-Berichte Nr. 819, no numbers.
[90] Dymola (1999), http://www.dynasim.se.
[91] Ebert, C. (1998), Experiences with colored predicate-transition nets for
specifying and prototyping embedded systems, IEEE Transactions on Sys-
tems, Man and Cybernetics—Part B: Cybernetics,Vol. 28, No. 5, 10/98,
641–52.
[92] Ecker, W. (1993), Using VHDL for HW/SW co-specification, Proc. Euro-
DAC 1993, 500–5.
[93] Ecker, W. and Mrva, M. (1996), Objektorientierung: Modellierungs-und
Entwurfsparadigma des Jahres 2000, 2. GI/ITG/GME-Workshop Hard-
warebeschrei bungssprachen und Modellierungsparadigmen, (Herausgeber:
M. Glesner) 118–127.
[94] Elmqvist, H. and Mattson, S. E. (1997), Modelica — the next generation
modeling language, Proc. World Congress on System Simulation (WCSS
’97).
[95] Enderlein, V., H¨ artel, T., Keil, A. and Oberm¨ uller, J. (1997), Modellierung
und Simulation mechanischer Komponenten von mechatronischen Syste-
men, System-Engineering in der KFZ-Entwicklung, VDI-Berichte 1374,
479–97.
[96] Enge, O., Freudenberg, H., Kielau, G. and Maißer, P. (1997), Model-
lierung und Simulation eines integrierten elektromechanischen Mehrkoordi-
natenantriebs, Mechatronik im Maschinen- und Fahrzeugbau, VDI-Berichte
1315, 15–25.
[97] Ernst, R. and Henkel, J. (1992), Hardware-software codesign of embed-
ded controllers based on hardware extraction, Proc. of the International
Workshop on Hardware/Software Codesign, 1–14.
[98] Ernst, R. (1999), Automatisierter Entwurf eingebetteter Systeme, at Auto-
matisierungstechnik, 7/99, 285–94.
[99] Fabula, T. (1992), Finite-Elemente - Modellierung in der Mikromechanik,
me 6, II-III.
[100] Fardoun, A. A., Fuchs, E. F. and Huang, H. (1992), Modelling and sim-
ulation of an electronically commutated permanent-magnet machine drive
system using SPICE, IEEE Industry Application Society Conference (1992),
439–47.
[101] Fasol, K. H. (1990), Aspekte des Rechnereinsatzes in der Regelungstech-
nik — eine Bestandsaufnahme, 6. Symposium Simulationstechnik (ASIM),
13–26.
[102] Fedder, G. K.andClark, K. H.(1995),Modellingandsimulationofmicrores-
onators with meander suspensions, International Conference on Simulation
and Design of Microsystems and Microstructures (MicroSIM) 1, 175–83.
[103] Fedder, G. K. and Jing, Q. (1998), NODAS 1.3 — nodal design of actu-
actors and sensors, IEEE/VIUF Workshop on Behavioral Modeling and
Simulation (BMAS), Orlando.