Page 241 - Membranes for Industrial Wastewater Recovery and Re-Use
P. 241

210  Membranes for lndustrial Wastewater Recovery and Re-use


            Alva-Argaez,  A.,  Kokossis,  A.C.  and  Smith,  R.  (1998b).  Wastewater
          minimisation of industrial systems using and integrated  approach. Computers
           Chem. Eng., 22, S741-S744.
             American Process Inc. (2002). Water Close@, Is there a reason to save water
           on your mill, http:/www.americanprocess.com/documents/WaterClose.pdf.
            Andersen, M., Kristensen, G.H. and Wenzel, H. (2002). Tools for evaluation of
           water reuse. 2nd International Conference on Industrial Wastewater Recycling
           and Reuse (IWRR2), Cranfield University, July.
             Bagajewicz,  M.J.  (2002). Final  report:  Chemical  plant  wastewater  reuse
           and   zero   discharge   cycles,   http:/es.epa.gov/ncer/finl/grants/96/sust/
           bagajewicz.htm1.
             Bisschops, I. (2002). Textile wastewater characterisation, a literature review.
           Internal report of a European project (TOWEFO). Limited information available
           at http://spring.bologna.enea.it/towefO/,
             Brouckaert, C.J., Schneider, J., Mansfiled, M. and Buckley, C.A. (2002). Water
           pinch analysis as a transparent tool for the co-regulation of industrial processes.
           Proceedings of the Biennial Conference of the Water Institute of Southern Africa
           (WISA) (www .wrc.org.z).
             Buckley, C.A., Brouckaert, C.J. and Renken, G. E. (2000). Wastewater reuse,
           the South African experience. Wat. Sci. Tech., 41, 15 7-1 63.
             Buehner, F.W.  and  Rossiter,  A.P.  (1996). Minimize waste  and  managing
           process design. Chmetech, 64-72.
             Castro, P, Mato, H. Fernandes, M.C.  and Nunes, P. (1999). AquoMin: waste
           minimisation  software.  Proceedings  of  the  2nd  Conference  on  Process
           Integration,  Modeling  and  Optimisation  for  Energy  Saving  and  Pollution
           Reduction (PRES '99), Budapest, Hungary, pp. 205-210.
             Doyle,  S.J. and  Smith,  R.  (1997). Targetting  water  reuse  with  multiple
           contaminants. Trans IChemE, 75(B), 181-189.
             European  Commission  (200  1). Reference  document  on  best  available
           techniques  for  the textile  industry. Report  from  the Institute for  Prospective
           Technological  Studies, Technologies  for  Sustainable  Development,  European
           IPPC bureau (http:/eippcb.jrc.es).
             El-Halwagi,  M.M.  (1992). Synthesis of  reverse  osmosis  networks  for waste
           minimisation. AIChE J.,  38(8), 1185.
             El-Halwagi,  M.M.  and  Stanley,  C.  (1995). In  Rossiter,  A.P.  (ed) Waste
           minimisation. McGraw Hill, New York, pp. 15-16.
             GAMS (2002). The GAMS system, http:/www.gams.com/docs/intro.htm.
             Gianadda, P., Brouckaert, C.J. and Buckley, C.A. (2002). Process water pinch
           analysis guides water, reagent and effluent management - selected case studies
           from the chloralkali  industry. Proceedings  of the Biennial  Conference  of  the
           Water Institute of Southern Africa (WISA) (www.wrc.org.z).
             Kuo, W.-C.J. and Smith, R. (1997). Effluent treatment system design. Chem.
           Eng. Sci., 52,4273-4290.
             Kuo, W.-C.J. and Smith, R.  (1998). Design of  water-using systems involving
           regeneration. Trans IChemE, 76(B), 94-1 14.
   236   237   238   239   240   241   242   243   244   245   246