Page 223 - MODELING OF ASPHALT CONCRETE

VEPCD Modeling of Asphalt Concr ete with Gr owing Damage 201

Chehab, G. R., Y. R. Kim, R. A. Schapery, M. W. Witczak, and R. Bonaquist (2002), “Time-
Temperature Superposition Principle for Asphalt Concrete Mixtures with Growing
Damage in Tension State,” Journal of Association of Asphalt Paving Technologists,
Vol. 71, pp. 559–593.
Chehab, G. R., Y. R. Kim, R. A. Schapery, M. W. Witczak, and R. Bonaquist (2003),
“Characterization of Asphalt Concrete in Uniaxial Tension Using a Viscoelastoplastic
Model,” Journal of the Association of Asphalt Paving Technologists, pp. 315–355.
Chehab, G. R., and Y. R. Kim (2005), “Viscoelastoplastic Continuum Damage Model
Application to Thermal Cracking of Asphalt Concrete,” Journal of Materials in Civil
Engineering, ASCE, Vol. 17, No. 4, pp. 384–392.
Daniel, J. S. (2001), “Development of a Simplified Fatigue Test and Analysis Procedure
Using a Viscoelastic, Continuum Damage Model and Its Implementation to WesTrack
Mixtures,” Ph.D. dissertation, North Carolina State University, Raleigh, NC.
Daniel, J. S., and Y. R. Kim (2002), “Development of a Simplified Fatigue Test and Analysis
Procedure Using a Viscoelastic Continuum Damage Model,” Journal of the Association
of Asphalt Paving Technologists, Vol. 71, pp. 619–650.
Federal Highway Administration. Pooled-Fund Study entitled “Full-Scale Accelerated
Performance Testing for Superpave and Structural Validation,” FHWA Turner-
Fairbanks Highway Research Center.
Fwa, T. F., B. F. Low, and S. A. Tan (1995), “Laboratory Determination of the Thermal
Properties of Asphalt Mixtures by Transient Heat Conduction Method,” Transportation
Research Record, Transportation Research Board, National Research Council, Vol. 1492.
Gerritsen, A. H., C. A. P. M. Van Gurp, J. P. J. Van der Heide, A. A. A. Molenaar, and A. C.
Pronk (1987), “Prediction and Prevention of Surface Cracking in Asphalt Pavements,”
6thInternational Conference on Structural Design and Asphalt Pavements, The University

of Michigan, Ann Arbor, Michigan, pp. 378–391.
Gibson, N. H., C. W. Schwartz, R. A. Schapery, and M. W. Witczak (2003), “Viscoelastic,
Viscoplastic, and Damage Modeling of Asphalt Concrete in Unconfined Compression,”
Transportation Research Record, No. 1860, pp. 3–15.
Guddati, M. N. (2001), “FEP++: A Finite Element Program in C++, Input Manual,”
Department of Civil, Construction, and Environmental Engineering, North Carolina
State University.
Jung, D. H., and T. S. Vinson (1994), “Prediction of Low Temperature Cracking: Test
Selection,” Rep. SHRP-A-400, SHRP, National Research Council, Washington, D.C.
Kachanov, L. M. (1958), “Time of Rupture Process under Creep Conditions,” Izvestiya
Akademii Nauk SSR OtdelenieTechnicheskikh Nauk, Vol. 8, p. 26.
Kachanov, L. M. (1986), Introduction to the Theory of Damage, Martinus Nijhoff, The Hague.
Kim, Y. R., and D. N. Little (1990), “One-Dimensional Constitutive Modeling of Asphalt
Concrete,” ASCE Journal of Engineering Mechanics, Vol. 116, No. 4, pp. 751–772.
Kim, Y. R., Y. C. Lee, and H. J. Lee (1995), “Correspondence Principle for Characterization
of Asphalt Concrete,” Journal of Materials in Civil Engineering, ASCE, Vol. 7, No. 1,
pp. 59–68.
Kim, Y. R., and H. J. Lee (1997), “Healing of Microcracks in Asphalt and Asphalt
Concrete,” Final report submitted to Federal Highway Administration/Western
Research Institute.
Kim, Y. R., J. Daniel, and H. Wen (2002), “Fatigue Performance Evaluation of WesTrack and
Arizona SPS-9 Asphalt Mixtures Using Viscoelastic Continuum Damage Approach,”
Final report to Federal Highway Administration/North Carolina Department of
Transportation, Report No. FHWA/NC/2002–004.