Page 247 - Principles of Applied Reservoir Simulation 2E

232 Principles of Applied Reservoir Simulation

Table 23-3
Standard Configuration of WINB4D

Dimensioning Parameters
Maximum number of blocks in model 1000
Maximum number of Rock regions 3
Maximum number of entries in a Rock region table 30
Maximum number of PVT regions 3
Maximum number of entries in a PVT region table 30
Maximum number of wells 25
Maximum number of connections per well 5

WINB4D must be copied to a folder on your hard drive before running.
The following procedure is recommended for a CD drive D and hard drive C
running Windows 95/98/NT:
+ Open Windows Explorer and select your CD drive.
4 Use a Windows-based Unzip program to extract all of the files
from the WINB4D file on the CD to a folder on your hard drive.
4 Respond to questions.

23.2 Input Data File - WTEMP.DAT

WINB4D reads a file called WTEMP.DAT and outputs to files
WTEMP.TSS, WTEMP.PLT, WTEMP.WEL, WTEMP.ROF, and WTEMP.-
ARR. The output files are described in Chapter 26. You should rename any runs
you wish to save because WINB4D overwrites the WTEMP.* files when it is
executed.
The easiest way to prepare a new data file is to edit an old one. This will
give you an example of the formats needed for most options. If you start with
an old data set, make sure that you check all applicable data entries and make
changes where appropriate.