Page 270 - Principles of Applied Reservoir Simulation 2E

Part IV: WINB4D User's Manual 255

5 II, 12, Jl, J2, Kl, K2, VALTZ
Omit this record ifNUMTZ = 0.
11 Coordinate of first region block in I direction.
12 Coordinate of last region block in I direction.
J1 Coordinate of first region block in J direction,
J2 Coordinate of last region block in J direction,
K1 Coordinate of first region block in K direction.
K2 Coordinate of last region block in K direction.
VALTZ Multiplier of z direction transmissibility for region.
NOTE: NUMTZ records must be read.

24.4 Rock and PVT Regions

1. Heading Up to 80 characters.

2. NROCK, NPVT
NROCK Number of distinct Rock regions. A separate set of satu-
ration-dependent data must be entered for each Rock region.
NPVT Number of distinct PVT regions. A separate set of pressure-
dependent data must be entered for each PVT region.

3. Heading Up to 80 characters.
Omit this record if NROCK = 1.

4 NUMROK
Omit this record if NROCK = 1.
NUMROK = 0 Enter Rock region value for each block.
NUMROK > 0 Number of regions where the Rock region default
value of 1 is changed.

5. IV AL
Omit this record if NROCK = 1 or NUMROK > 0.
IVAL Array of Rock region values. Read II x Jj x KK values.