Page 280 - Principles of Applied Reservoir Simulation 2E
P. 280
Part IV: WINB4D User's Manual 265
GORMAX Maximum allowed gas-oil ratio for a producing oil well
(SCF/STB); GORMAX ;> 0.
PAMIN Minimum field average pressure (psia); the run will be
terminated when the pore volume weighted average reser-
voir pressure < PAMIN.
PAMAX Maximum field average pressure (psia); the run will be
terminated when the pore volume weighted average reser-
voir pressure > PAMAX.
NOTE: PAMIN and PAMAX should be within the range
of pressures covered by the fluid PVT tables discussed in
Chapter 24.6.
3. WOROCK
Omit this record ifWORMAX * 0.
WOROCK Maximum WOR allowed in the corresponding Rock region.
NOTE: If a well is completed in more than one Rock region,
the largest maximum WOR which applies to the Rock
regions penetrated by the well will be used as the WOR
control for that well. Enter NROCK records - one for each
Rock region.
4. GOROCK
Omit this record if GORMAX * 0.
GOROCK Maximum GOR allowed in the corresponding Rock region.
NOTE: If a well is completed in more than one Rock region,
the largest maximum GOR which applies to the Rock
regions penetrated by the well will be used as the GOR
control for that well. Enter NROCK records - one for each
Rock region.
24.9 Solution Method Specification
1. Heading Up to 80 characters.