Page 283 - Principles of Catalyst Development

274 REFERENCES
171. H. P. Stephens and R. G. Dosch, Catalyst Preparation via Hydrous Metal Oxide lon-
Exchangers, Preparation of Catalysts IV (B. Delmon, P. Grange, P. A. Jacobs, and J.
Poncelet, eds.), p. 271, Elsevier, Amsterdam (1987).
172. M. Kamiyama, Design and Preparation of Impregnated Catalysts, Catal. Rev. 27, 341
(1985).
173. M. Kotter and L. Riekert, The Influence of Impregnation, Drying and Activation on the
Activity and Distribution of CuO on a-Alumina, Preparation of Catalysts II (B. Delman,
P. Grange, P. Jacobs, and G. Poncelet, eds.), p. Elsevier, Amsterdam (1979).
174. s. Y. Lee and R. Aris, The Distribution of Active Ingredients in Supported Catalysts
Prepared by Impregnation, Catal. Rev. 27, 207 (1981).
175. J. L. G. Fierro, P. Grange, and B. Delmon, Control of Concentration Profiles by Rational
Preparation of Pelleted Hydrodesulfurization Catalysts, Preparation o( Catalysts IV (8.
Delmon, P. Grange, P. Jacobs, and G. Poncelet, eds.), p. 591, Elsevier, Amsterdam (1987).
176. J. T. Richardson, unpublished results.
177. V. V. Boldyrev, M. Buleus, and B. Delmon, The Control (lfthe Reactivity o.fSolids, p. 87,
Elsevier, Amsterdam (1979).
178. J. T. Richardson and R. J. Dubus, Preparation Variables in Nickel Catalysts, 1. Catal.
54,207 (1978).
179. R. Prada Silvy, J. L. G. Fierro, P. Grange, and B. Delman, Influence of the Activation
Procedure on the Nature and Concentration of the Active Phase in Hydrodesulfurization
Catalysts, Preparation of Catalysts IV (B. Delmon, P. Grange, P. Jacobs, and G. Poncelet,
eds.), p. 605, Elsevier, Amsterdam (1987).
180. E. Lieber and F. L. Morritz, The Uses of Raney Nickel, Advances in Catalysis, Vol. 5
(W. G. Frankenburg, E. K. Rideal, and V. l. Komarewsky, eds.), p. 417, Academic, New
York (1953).
181. Ph. Courty and Ch. Marcilly, A Scientific Approach to the Preparation of Bulk Mixed
Oxide Catalysts, Preparation (ll Catalysts III (G. Poncelet, P. Grange, and P. Jacobs,
eds.), p. 485, Elsevier, Amsterdam (1983).
182. S. P. S. Andrew, Heterogeneous Catalyst Preparation: The Fabrication of Microstructures,
Preparation of Catalysts I (B. Delmon, P. A. Jacobs, and G. Poncelet, eds. l, p. 429,
Elsevier, Amsterdam (1976).
183. C. L. Thomas, Catalytic Processes and Proven Catalysis, Academic, New York (1970),
184. W. S. Briggs, Catalysts and the Automobile-Twenty-Five Years Later, Applied Industrial
Catalysis, Vol. 3 (B. E. Leach, ed.), p. 241, Academic, New York (1984).
185. K. Taylor, Automobile Catalysis Converters, Catalysis, Science and Technology, Vol. 5
(1. R. Anderson and M. Boudart, eds.), p. 119, Springer· Verlag, New York (1984).
186. J. M. Winton, Catalysts '88 Restructuring for Technical Clout, Chemical Week June 29,
20 (1988 J.
187. E. F. Sanders and E. J. Schloss macher, Catalyst Scale-Up-Pitfall or Payoff') Applied
Industrial Catalysis, Vol. I (8. E. Leach, ed.l, p. 31, Academic, New York (1983).
188. K. Jiratova, L. Janacek, and P. Schneider, Influence of Aluminum Hydroxide Peptization
on Physical Properties of Alumina Extrudates, Preparation of Catalysts III (G. Poncelet,
P. Grange, and P. A. Jacobs, eds.), p. 653, Elsevier, Amsterdam (1983).
189. R. M. Cahen, J. M. Andre, and H. R. Debus, Process for the Production of Spherical
Catalyst Supports, Preparation of Catalysts II (B. Delman, P. Grange, P. Jacobs, and G.
Poncelet, eds.), p. 585, Elsevier, Amsterdam (1979).
190. R. O. Feuge, Hydrogenation of Glyceride Oils, Catalysis, Vol. 3 (P. H. Emmett, ed.), p.
413, Reinhold, New York (1955).
191. F. Delannay and B. Delmon, Methods of Catalyst Characterization: An Overview,
Characterization of Heterogeneous Catalysis (F. Delannay, ed.), p. 1, Marcel Dekker,
New York (1984).