Page 607 - Rock Mechanics For Underground Mining

References

Adams, D. J., Hemp, D. A. and G¨urtunca, R. G. (1994) A systematic seismic system as a tool in rock
engineering. Proc. Int. Workshop on Applied Rockburst Research, Santiago (eds: J. C. Cereceda and
M. Van Sint Jan), 71–82.
Adler, L. and Sun, M. (1968) Ground control in bedded formations. Bulletin 28, Research Div.,Virginia
Polytechnic Institute.
Airy, G. B. (1862) On the strains in the interior of beams. Rep, 32nd Mtg Br. Assoc. Adv. Sci., Cambridge,
82–6.
Aki, K. and Richards, P. G. (1980) Quantitative Seismology. W. H. Freeman: San Francisco.
Alejano, L. R., Ramirez-Oyanguren, P. and Taboada, J. (1999) FDM predictive methodology for subsidence
due to flat and inclined seam mining. Int. J. Rock Mech. Min. Sci., 36 (4): 475–91.
Alexander, J. A. G., Bowes, R., Urbancic, T. I., Trifu, C. I. and Feustal, A. J. (1995) HYPERION: a real-
time monitoring system for induced seismicity; a description of acquisition and processing capabilities.
International Union of Geodesy and Geophysics General Assembly 21, Week A, 365.
Allen, C. W. (1934) Subsidence arising from the Athens system of mining at Nauganee, Mich. Trans. Am.
Inst. Min. Metall. Petrolm Engrs, 109: 195–202.
Amadei, B. (1988) Strength of a regularly jointed rock mass under biaxial and axisymmetric loading
conditions. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 25(1): 3–13.
Amadei, B. and Goodman, R. E. (1981) Formulation of complete plane strain problems for regularly jointed
rocks. Rock Mechanics from Theory to Application, Proc. 22nd U. S. Symp. Rock Mech., Cambridge,
245–51. Mass. Inst. Technol.: Cambridge, Mass.
Amstad, C. and Koppel, J. (1977) A multihead borehole rod extensometer design. Field Measurements in
Rock Mechanics, Proc. Int. Symp., Zurich (ed. K. Kovari), 1: 429–36. A. A. Balkema: Rotterdam.
Anagnostou, G. and Kovari, K. (1993) Significant parameters in elastoplastic analysis of underground
openings. J. Geotech. Engng, ASCE, 119(3): 401–19.
Andrieux, P. and Simser, B. (2001) Ground-stability-based mine design guidelines at the Brunswick
Mine. Underground Mining Methods: Engineering Fundamentals and International Case Studies (eds
W. A. Hustrulid and R. L. Bullock), 207–14. Society for Mining, Metallurgy and Exploration: Littleton,
Colorado.
Anon (1973) Mine Filling. Proc. Jubilee Symp. on Mine Backfilling, Mount Isa. North West Qld Branch,
Aust. Inst. Min. Metall.: Mount Isa.
Anon (1974) Use of shotcrete for underground structural support. Proc. Engng Foundn Conf, ASCE, New
York.
Anon (1978) Mining with Backfill. Proc. 12th Can. Rock Mech. Symp., Sudbury. Can. Inst. Min. Metall.:
Montreal.
Anon (1999) Definition of geotechnical engineering. Ground Engng, 32(11): 39.
Ashwin, D. P., Campbell, S. G., Kibble, J. D., Haskayne, J. D., Moore, J. F. A. and Shepherd, R. (1970)
Some fundamental aspects of face powered support design. Min. Engr, 129(119): 659–71.
Atkinson, J. H., Brown, E. T. and Potts, D. M. (1975) Collapse of shallow unlined tunnels in dense sand.
Tunnels and Tunnelling, 7(3): 81–7.
Austin, M. W., Bray, J. W. and Crawford, A. M. (1982) A comparison of two indirect boundary element
formulations incorporating planes of weakness. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 19(6):
339–44.
Avasthi, J. M. and Harloff, G. J. (1982) Subsidence associated with single and multi-cavities for under-
ground coal gasification. J. Energy Resources Technol., Trans. Am. Soc. Mech. Engrs, 104: 99–104.
Aydan, O. and Kawamoto, T. (1997) The general characteristics of the stress state in the various parts of
the earth’s crust. Rock Stress, Proc. Int. Symp., Kumamoto (eds K. Sugawara and Y. Obara), 369–73. A.
A. Balkema: Rotterdam.
Backers, T., Stephansson, O. and Rybacki, E. (2002) Rock fracture toughness testing in Mode II – punch-
through shear test. Int. J. Rock Mech. Min. Sci., 39(6): 755–69.
Badr, S., Schlisser, A., Salamon, M. and Ozbay, U. (2002) Numerical modeling of yielding chain pillars in
longwall mines. Mining and Tunnelling Innovation and Opportunity, Proc. 5th North Am. Rock Mech.

589