Page 614 - Rock Mechanics For Underground Mining

REFERENCES

Drescher, A. and Vardoulakis, I. (1982) Geometric softening in triaxial tests on granular material.
G´ eotechnique, 32(4): 291–303.
Dunnicliff, J. (1988) Geotechnical Instrumentation for Monitoring Field Performance. Wiley: New York.
Duplancic, P. (2001) Characterisation of Caving Mechanisms through Analysis of Stress and Seismicity.
PhD thesis, University of Western Australia.
Duplancic, P. and Brady, B. H. (1999) Characterisation of caving mechanisms by analysis of seismicity
and rock stress. Proc. 9th Congr., Int. Soc. Rock Mech., Paris (eds G. Vouille and P. Berest), 2: 1049–53.
A. A. Balkema: Rotterdam.
Duvall, W. I. (1953) Strain wave shapes in rock near explosions. Geophys., 18: 310–23.
Duvall, W. I. and Atchison, T. C. (1957) Rock Breakage by Explosives. U. S. Bur. Mines Rep. Invest. 5356.
Eissa, E. A. (1980) Stress Analysis of Underground Excavations in Isotropic and Stratified Rock using the
Boundary Element Method. PhD thesis, University of London.
Elliott, G. M. (1982) An Investigation of a Yield Criterion for Rock. PhD thesis, University of London.
Elliott, G. M. and Brown, E. T. (1985) Yield of a soft, high porosity rock. G´ eotechnique, 35(4): 413–23.
Endersbee, L. A. and Hofto, E. O. (1963) Civil engineering design and studies in rock mechanics for
Poatina underground power station, Tasmania. J. Instn Engrs Aust., 35(9): 187–209.
Enever, J. R. and Chopra, P. N. (1986) Experience with hydraulic fracture stress measurements in granite.
Proc. Int. Symp. on Rock Stress and Rock Stress Measurement, Stockholm (ed. O. Stephansson), 411–20.
Centek: Lule˚a.
Evans, W. H. (1941) The strength of undermined strata. Trans Instn Min. Metall., 50: 475–532.
Everett, G. and Medhurst, T. (2003) Facing tomorrow’s challenges today. Aust. Min. Monthly, Mar.: 78–80.
Everling, G. (1973) Die Vorausberechnung des Gebirgsdrucks fur einen Abbauplan. Gluckauf, 109(23):
1131–3.
Ewy, R. T., Kemeny, J. M., Zheng, Z. and Cook, N. G. W. (1987) Generation and analysis of stable
excavation shapes under high rock stresses. Proc. 6th Congr., lnt. Soc. Rock Mech., Montreal (eds
G. Herget and S. Vongpaisal), 2: 875–81. A. A. Balkema: Rotterdam.
Fayol, M. (1885) Sur les mouvements de terrain provoques par l’exploitation des mines. Bull. Soc.
L’Industrie Minerale, 2nd Series, 14: 818.
Fenner, R. T. (1974) Computing for Engineers. MacMillan: London.
Ferguson, G. A. (1979) Optimisation of block caving within a complex environment. Min. Mag., 140(2):
126–39.
Fisher, R. (1953) Dispersion on a sphere. Proc. Roy. Soc, A217: 295– 305.
Fletcher, J. B. (1960) Ground movement and subsidence from block caving at Miami mine. Trans Soc.
Min. Engrs. AIME, 217: 413–22.
Folinsbee, J. C. and Clarke, R. W. D. (1981) Selecting a mining method. Design and Operation of Caving
and Sublevel Stoping Mines (ed. D. R. Stewart), 55–65. AIME: New York.
Franklin, J. A. (1977) The monitoring of structures in rock. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr.,
14(4): 163–92.
Franklin, J. A. and Woodfield, P. F. (1971) Comparison of a polyester resin and a mechanical rockbolt
anchor. Trans. Instn Min. Metall., 80: A91–100.
Frith, R. (2000) Optimising primary bolting to aid roadway development in the current OH&S environment:
conflict or opportunity. Aust Coal Review, Oct.: 30–35.
Fuller, P. G. (1981) Pre-reinforcement of cut and fill stopes. Applications of Rock Mechanics to Cut and
Fill Mining (eds O. Stephansson and M. J. Jones), 55–63. Instn Min. Metall.: London.
Fuller, P. G. (1999) Roof strata reinforcement – achievements and challenges. Rock Support and Reinforce-
ment Practice in Mining, Proc. Int. Symp. Rock Support, Kalgoorlie (eds E. Villaescusa, C. R. Windsor
and A. G. Thompson), 405–15. A. A. Balkema: Rotterdam.
Gale, W. J. and Blackwood, R. L. (1987) Stress distributions and rock failure around coal mine roadways.
Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 24(3): 165–73.
Galvin, J. M. (1988) An overview of the prediction and effects of surface subsidence. Prediction versus
Performance, Proc. 5th Aust. – N. Z. Conf. Geomech., Sydney, 340–45. Instn Engrs, Aust.: Canberra.
Galvin, J. M., Hebblewhite, B. K. and Salamon, M. D. G. (1999) University of New South Wales pillar
strength determinations for Australian and South African mining conditions. Proc. 2nd Int. Workshop
on Coal Pillar Mechanics and Design, Vail (eds C. Mark, K. A. Heasley, A. T. Iannocchione and R. J.
Tuchman), 63–71, NIOSH IC 9448. U. S. Dept. Health & Human Services: Pittsburgh.
Garford Pty. Ltd. (1990) An Improved, Economical Method for Rock Stabilisation. Garford: Perth.
Gay, N. C. (1975) In-situ stress measurements in Southern Africa. Tectonophysics, 29: 447–59.

596