Page 353 - Sustainability in the Process Industry Integration and Optimization

330 Bibl iog r aph y

IEA [International Energy Agency], 2009. Energy Technology Systems Analysis
Programme. <www.etsap.org/> (accessed 25 April 2009).
Ierapetritou, M. G., Floudas, C. A., 1998a. Effective continuous-time formulation
for short-term scheduling. Part 1. Multipurpose batch processes. Industrial &
Engineering Chemistry Research, 37, 4341–4359.
Ierapetritou, M. G., Floudas, C. A., 1998b. Effective continuous-time formulation
for short-term scheduling. Part 2. Continuous and semi-continuous processes.
Industrial & Engineering Chemistry Research, 37, 4360–4374.
ILOG, 2006. ILOG Optimisation Decision Manager. <www.ilog.com/download/
docs/DS-ODM.pdf> (accessed 26 October 2009).
ILOG, 2009. ILOG Parallel CPLEX. <www.ilog.com/products/cplex/product/
parallel.cfm> (accessed 26 October 2009).
INFORSE-Europe, 2009. Vision 2050: Visions for a Renewable Energy World.
<www.inforse.org/europe/Vision2050.htm> (accessed 25 April 2009).
Institute for Energy Technology, 2009. HYDROGEMS. <www.hydrogems.no/>
(accessed 25 April 2009).
Institute for Sustainable Solutions and Innovations, 2009. Energy Rich Japan.
<www.energyrichjapan.info> (accessed 4 July 2009).
Instituto Superior Técnico, 2010. H2RES (Instituto Superior Técnico & University
of Zagreb). <www.powerlab.fsb.hr/h2RES/> (accessed 5 May 2010).
International Energy Agency, 2010. Energy Technology Systems Analysis
Programme. <www.etsap.org/> (accessed 5 May 2010).
International Institute for Applied Systems Analysis, 2009. Energy Modeling
Framework: Model for Energy Supply Strategy Alternatives and Their General
Environmental Impact (MESSAGE). <www.iiasa.ac.at/Research/ENE/model/
message.html> (accessed 26 April 2009).
IPS [Invensys Process Systems], 2009a. HEXTRAN—Heat Transfer. <ips.invensys.
com/en/products/processdesign/pages/heattransfer-p007.aspx> (accessed
26 October 2009).
IPS [Invensys Process Systems], 2009b. PRO/II. <ips.invensys.com/en/products/
processdesign/Pages/Pro-II-P004.aspx> (accessed 26 October 2009).
Ireson W. G., Coombs, C. F., Moss, R. Y., 1996. Handbook of reliability engineering and
management. New York: McGraw-Hill.
Jansen, P., Koppejan, J., Hetland, J., Klemeš, J., Phuengphaeng, T., Pipio, A., Perry,
S., 2004. EMINENT accelerates market introduction of promising early stage
technologies for transport and energy. Chemical Engineering Transactions, 5,
187–192.
Jegede, F. O., Polley, G. T., 1992. Capital cost targets for networks with non-uniform
heat exchanger specifications. Computers & Chemical Engineering, 16(5), 477–
495.
Jeżowski, J., 1990. Linear programming based method of heat exchanger network
synthesis. Industrial & Engineering Chemistry Process Design, 10, 305–312.
Jeżowski, J., Shethna, H. K., Castillo, F. J.L., 2003. Area target for heat exchanger
network using linear programming. Industrial & Engineering Chemistry
Research, 42(8), 1723–1730.
Joint Global Change Research Institute [JGCRI]. 2009. Pacific Northwest National
Laboratory and University of Maryland. <www.globalchange.umd.edu/>
(accessed 15 June 2009).
Karuppiah, R., Grossmann, I. E., 2006. Global optimization for the synthesis
of integrated water systems in chemical processes. Computers & Chemical
Engineering, 30, 650–673.
Karvountzi, G. C., Price, C. M., Duby, P. F., 2004. Comparison of molten carbonate
and solid oxide fuel cells for integration in a hybrid system for cogeneration or
tri-generation. ASME, Advanced Energy Systems Division AES, 44, 139–150.
Kazantzi, V., El-Halwagi, M. M., 2005. Targeting material reuse via property
integration. Chemical Engineering Progress, 101(8), 28–37.
Kececioglu, D. B., 2002. Reliability engineering handbook, vol 1. Lancaster, PA:
DESTech.
Kemp Pinch Spreadsheet, 2006. NOV06 Final. <books.elsevier.com/companions/
0750682604> (accessed 13 December 2009).