Page 354 - Sustainability in the Process Industry Integration and Optimization

Bibl iog r aph y 331

Kemp, I. C., 2007. Pinch analysis and process integration. A user guide on process
integration for efficient use of energy. Amsterdam: Elsevier.
Kemp, I. C., Deakin, A. W., 1989. The cascade analysis for energy and process
integration of batch processes. Part 1: Calculation of energy targets. Chemical
Engineering Research and Design, 67, 495–509.
Khachiyan, L. G., 1979. A polynomial algorithm in linear programming. Doklady
Akademii Nauk SSSR, 244, 1093–1096 (in Russian).
Kiefer, J., 1953. Sequential minimax search for a maximum. Proceedings of the
American Mathematical Society, 4, 502–506.
Kiepuszewski, B., ter Hofstede, A. H. M., van der Aalst, W. M. P., 2003. Fundamentals
of control flow in workflows. Acta Infromatica, 39(3), 143–209.
Kim, S. B., Lee, H. K., Lee, I. B., Lee, E. S., Lee, B., 2000. Scheduling of non-sequential
multipurpose batch processes under finite intermediate storage policy. Computers
& Chemical Engineering, 24, 1603–1610.
Kim, J.-K., Smith, R., 2004. Automated design of discontinuous water systems.
Process Safety and Environmental Protection, 82(3), 238–248.
Kim, J., Smith, R., 2005. Pinch design and analysis. In Encyclopedia of Chemical
Processing, pp. 2165–2180. New York: Marcel Dekker.
King, C. J., 1980. Separation processes. New York: McGraw-Hill.
Kirkpatrick, S., Gelatt, C. D., Jr., Vecchi, M. P., 1983. Optimization by simulated
annealing. Science, 220(4598), 671–680.
Klemeš, J., 1977. Chemical process simulation programs—Present state and
future development of flowsheeting. Collection of Czechoslovak Chemical
Communications, 42(2), 426–445.
Klemeš J., 1986. Synthesis of process flowsheets a comprehensive review. 35th
National Congress CHISA (Karlovy Vary, Czech Republic), lecture A3.05 (in
Czech).
Klemeš, J., Bulatov, I., 2001. Integration of technical information with economic
and business data in process industries applications. PRES '01 Conference on
Process Integration, Modelling, and Optimisation for Energy Saving and Pollution
Reduction (Florence, Italy, 20–23 May).
Klemeš, J., Bulatov, I., Cockeril, T., 2007. Techno-economic modelling and cost
functions of CO capture processes. Computers & Chemical Engineering, 31(5–6),
2
445–455.
Klemeš, J., Bulatov, I., Hetland, J., Jansen, P., Koppejan, J., 2005a. Contribution to
market introduction of promising early stage hydrogen technologies—An
application of EMINENT software tool. Chemical Engineering Transactions, 8,
251–256.
Klemeš, J., Bulatov, I., Jansen, P., Koppejan, J., 2005b, Novel energy saving
technologies assessment by EMINENT evaluation tool. Chemical Engineering
Transactions, 8, 163–168.
Klemeš, J., Bulatov, I., Koppejan, J., 2009. Novel energy saving technologies
evaluation tool. Computers & Chemical Engineering, 33(3), 751–758.
Klemeš, J., Bulatov, I., Perry, S., 2008. Energy efficiency and carbon footprint
reduction. In E. Pistikopoulos, M. Georgiadis, and E. S. Kikkinides (Eds.),
Process systems engineering, vol. 5, pp. 203–254. Weinheim, Germany: Wiley.
Klemeš, J., Cockerill, T., Bulatov, I., Shackley, S., Gough, C., 2006. Engineering
feasibility of carbon dioxide capture and storage. In C. Gough and S. Shackley
(Eds.), Carbon capture and its storage: An integrated assessment, pp. 43–82.
Aldershot, U.K.: Ashgate.
Klemeš, J., Dhole, V. R., Raissi, K., Perry, S. J., Puigjaner, L., 1997. Targeting and
design methodology for reduction of fuel, power and CO on total sites.
2
Applied Thermal Engineering, 7, 993–1003.
Klemeš, J., Friedler, F., 2005. Recent novel developments in heat integration—Total
site, trigeneration, utility systems and cost-effective decarbonisation. Case
studies waste thermal processing, pulp and paper and fuel cells. Applied
Thermal Engineering, 25(7), 953–960.
Klemeš, J., Kimenov, G., Nenov, N., 1998. Application of pinch-technology in food
industry. 1st Conference on Process Integration, Modelling and Optimisation for