Page 247 - TPM A Route to World-Class Performance
P. 247

Case studies  221


                      0  There is more cost awareness, not only of  improvements in OEE, but
                        also of  material  costs. Workers are therefore more conscientious and
                        focused about waste.

                   Quotable quote

                          TPM has enabled people to develop skills that they didn’t know
                          they had.
                                                                         Chris Rose


                   4.0 Team  focus


                    Volpak bagging machine
                   The Volpak  machine packs  120 bags of  sweets every minute and was the
                   focus of  one of Adams’ three pilot studies. The machine was part of  the ’New
                   technology’ introduced into the factory over the past few years and had been
                   giving problems with quality and availability, partly due to the new type of
                   bag it was handling. Through collecting OEE data, assessing the six losses
                   and setting improvement priorities, dramatic improvements in performance
                   were made.
                      A 1 per cent improvement in performance on the Volpak is equivalent to
                   f35 000 in annual cost savings. In just three months, a series of  improvements
                   resulted in the OEE leaping from 69 per cent to 78 per cent, giving €210 000
                   of  cost avoidance and €105 000 of  actual savings per  annum based  on an
                   original estimated  and planned  OEE  for the nezo machine of  75 per  cent.
                   Finance was then able to incorporate a target OEE improvement of  80 per
                   cent, giving a further saving of  €70 000, into the budget for the following
                   year.

                   GD wrapping machine
                   When a reel of  foil sweet wrappers ran out, it took approximately 4 minutes
                   to  change the reel,  with  a loss of  50 wrappers and an average of  22  reel
                   changes per shift.
                      The TPM team responsible for the machine looked at an electronic heat-
                   impulse foil splicer, an improvement which led to L16 220 in cost savings for
                   the factory.


                   5.0 The future for TPM
                   The future objectives for TPM are to:

                      1 Reduce material usage.
                      2  Integrate TPM fully into the Adams culture.
   242   243   244   245   246   247   248   249   250   251   252