Page 96 - Using ANSYS for Finite Element Analysis A Tutorial for Engineers
P. 96
geometrIc modelIng • 83
9. Create the base of the bushing bracket:
Main Menu > Preprocessor > -Modeling- Create >
-Volumes- Block > By 2 Corners & Z +
WP X = 0
WP Y = 1
Width = 1.5
Height = 1.75
Depth = 0.75, then [OK]
Or issue: BLC4,0,1,1.5,1.75,0.75
10. Offset working plane to the front face of the bushing bracket:
Utility Menu > WorkPlane > Offset WP to > Keypoints +
Pick keypoint at the top left corner of the front face, then [OK]
Or issue: KWPAVE, 16
