Page 100 - Using ANSYS for Finite Element Analysis A Tutorial for Engineers
P. 100
geometrIc modelIng • 87
(b) Create a triangular area:
Main Menu > Preprocessor > -Modeling- Create >
-Areas- Arbitrary > Through KPs + Pick the 1st keypoint
where the base of the bushing bracket intersects the base
of the pillow block at X=1.5
Pick the 2nd keypoint where the base of the bushing bracket
intersects the bottom arch surface at X=1.5
Pick the 3rd keypoint that was created in step 14a at
X=1.5, Y=1, Z=3 [Ok]
Or issue: A,14,15,9
