Page 112 - Mechanical Behavior of Materials

References 113

deformation processing plain-carbon steel
dispersion hardening plasticizer
ductile (nodular) iron precipitation hardening
elastomer quenching and tempering
ferrite reinforced plastic
fibrous composite second phase
glass sintering
grain refinement solid-solution strengthening
gray iron stainless steel
heat treatment steel
intermetallic compound superalloy
laminate thermoplastic
low-alloy steel thermosetting plastic
martensite tool steel
materials selection vulcanization
network modifier whisker
particulate composite wrought metals
pearlite

REFERENCES

(a) General References
ASHBY, M. F. 2011. Materials Selection in Mechanical Design, 4th ed., Butterworth-Heinemann, Oxford, UK.
ASHBY,M., H. SHERCLIFF and D. CEBON. 2010. Materials: Engineering, Science, Processing and Design,
2nd ed., Butterworth-Heinemann, Oxford, UK.
ASTM. 2010. Annual Book of ASTM Standards, Section 1: Iron and Steel Products, Vols. 01.01 to 01.08,
ASTM International, West Conshohocken, PA.
BUDINSKI,K.G., andM.K. BUDINSKI. 2010. Engineering Materials: Properties and Selection, 9th ed.,
Prentice Hall, Upper Saddle River, NJ.
KINGERY, W. D., H. K. BOWEN,and D. R. UHLMANN. 1976. Introduction to Ceramics, 2d ed., John Wiley,
New York.
MALLICK, P. K. 2008. Fiber-Reinforced Composites: Materials, Manufacturing, and Design, 3rd ed., CRC
Press, Boca Raton, FL.
SAE. 2008. Metals and Alloys in the Unified Numbering System, 11th ed., Pub. No. SAE HS-1086, SAE
International, Warrendale, PA; also Pub. No. ASTM DS56J, ASTM International, West Conshohocken, PA.
SPERLING, L. H. 2006. Introduction to Physical Polymer Science, 4th ed., John Wiley, Hoboken, NJ.
(b) Materials Handbooks and Databases
ASM. 2001. ASM Handbook: Vol. 1, Properties and Selection: Irons, Steels, and High Performance Alloys; Vol.
2, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials; and Vol. 21, Composites,
pub. 1990, 1990, and 2001, respectively, ASM International, Materials Park, OH.
ASM. 1991. Engineered Materials Handbook: Vol. 2, Engineering Plastics; Vol. 3, Adhesives and Sealants; and
Vol. 4, Ceramics and Glasses, pub. 1988, 1990 and 1991, respectively, ASM International, Materials Park, OH.
CES. 2009. CES Selector 2009, database of materials and processes, Granta Design Ltd, Cambridge, UK. (See
http://www.grantadesign.com.)
DAVIS, J. R., ed. 1998. Metals Handbook: Desk Edition, 2d ed., ASM International, Materials Park, OH.