Page 230 - 3D Fibre Reinforced Polymer Composites

References

A&P Technology, 1997, New Dimensions, Vol. 1, Issue 1, Spring, pp 3.
Aboudi J., 1991, Mechanics of Composite Materials - A Unified Micromechanical
Approach, Elsevier, Amsterdam, The Netherlands.
Addis S., 1996, A bias yarn assembly forming device, Int. Patent WO 96/06213, 29
February.
Anahara M., Y. Yasui and H. Omori, 1991, Three-dimensional textile and method of
producing the same, European Patent 0-426-878-A1, 15 May.
Anwar K.O., P. J. Callus, K. H. Leong, J. I. Curiskis and I. Herszberg, 1997, Proc. of
the 1 lth Int. Conf. on Composite Materials, July 14-18, Gold Coast, Australia, 5:328.
Arendts F.J., K. Drechler and J. Brandt, 1993, Advanced textile structural composites -
status and outlook, Proc. of the Int. Conf. on Advanced Composite Materials, Ed T.
Chandra and A.K. Dhingra, 409-416.
Aymerich F., P. Priolo, R. Sanna and C.T. Sun, 2001, Fatigue behaviour of stitched
composite laminates', Proc. 13th Int. Conf. Comp. Mats., 25-29 June, Beijing, Paper
No. 1461.
Bannister M.K., 2001, Challenges for composites into the next millennium - a
reinforcement perspective, Comp., 32A901.
Bannister M.K., R. Braemar and P. Crothers, 1999, The mechanical performance of 3D
woven sandwich structures, Comp. Struc., 47:687-690.
Bannister M.K., I. Herszberg, A. Nicolaidis, F. Coman and K.H. Leong, 1998,
Composites Part A, 29A:293-300.
Bannister M.K. and A. Nicolaidis, 1998, The development of textile composite
prototypes for structural applications, Proc. of the 4" Int. Conf. on Textile
Composites, Kyoto, Japan, 12-14 October, pp 0-36-1 - 0-36-6.
Bathgate R.G., C.H. Wang and F. Pang, 1997, Effects of temperature on the creep
behaviour of woven and stitched composites, Comp. Struct., 38:435.
Bauer J., 2000, Cost improvement by changing the technology, Proc. of the 1" Stade
Composite Colloquium, September 7-8, Stade, Germany, 305-3 18.
Beckworth S.W. and C.R. Hyland, 1998, Resin transfer moulding: a decade of
technology advances, SAMPE J., 34:7-19.
Bib0 G.A. and P.J. Hogg, 1996, The role of reinforcement architecture on impact
damage mechanisms and post-impact compression behaviour, J. Mat. Sci., 31: 11 15.
Bib0 G.A., P.J. Hogg and M. Kemp, 1997, Mechanical characterisation of glass- and
carbon-fibre-reinforced composites made with non-crimp fabrics, Comp. Sci. &
Tech., 57:1221-1241.
Bib0 G.A., P.J. Hogg, R. Backhouse and A. Mills, 1998, Carbon-fibre non-crimp fabric
laminates for cost-effective damage-tolerant structures, Comp. Sci. & Tech., 58: 129-
143.
Billaut F. and 0. Roussel, 1995, Impact resistance of 3-D graphite/epoxy composites,
Proc. of the 11'' Int. Conf. on Comp. Mat., Vol. 5, Ed. A. Pourartip and K. Street,
Whistler, BC, Canada, 14-18 August 1995, Woodhead Publishing Ltd., 551-558.