Page 232 - 3D Fibre Reinforced Polymer Composites

References 22 1

Caneva C., S. Olivieri, C. Santulli and G. Bonifazi, 1993, Impact damage evaluation on
advanced stitched composites by means of acoustic emission and image analysis,
Comp. Struct., 25:121.
Caprin0 G., 1984, Residual strength predicted in impacted CFRP laminates, J. Comp.
Mat., 18508-518
CartiC D.D.R. and I.K. Partridge, 1999a, Delamination behaviour of Z-pinned
laminates, Proc. 12* Int. Conf. Comp. Mat., 5-9 July, Paris.
Carti6 D.D.R. and I.K. Partridge, 1999b, Delamination behaviour of Z-pinned
laminates, Proc. 2"' ESIS TC4 Conf., Ed. J. G. Williams, 13-15 Sept., CH- Les
Diablerets, Elsevier.
Chamis C.C., 1984, Simplified composite micromecahnics equations for hygral thermal
and mechanical properties, SAMPE Quarterly, April, 14-23
Chapman C. and J. Whitcomb, 1995, Effect of assumed tow architecture on predicted
moduli and stresses in plain weave composites, J. Comp. Mat., 29:2134-2159.
Chen L., X. M. Tao and C. L. Choy, 1999, On the microstructure of three-dimensional
braided preforms, Comp. Sci. & Tech., 59:391-404.
Chiu C.-H., C.-K. Lu and T.-C. An, 1994, The influence of braiding pitch-length on
flexural behaviour of 2-step braiding I-beam composites, Proc. of the 39th Int.
SAMPE Symposium., 11 - 14 April, 1617-1628.
Cholakara M.T., B.Z. Jang and C.Z. Wang, 1989, Deformation and failure mechanisms
in 3D composites, Proc. 34th Int. SAMPE Symp., 8-11 May, 2153-2160.
Chou S., H.-C. Chen and H.-E. Chen, 1992, Effect of weave structure on mechanical
fracture behaviour of three-dimensional carbon fiber fabric reinforced epoxy resin
composites, Comp. Sci. & Tech., 45:23-35.
Chou S., H-C Chen and C.-C. Wu, 1992, BMI resin composites reinforced with 3D
carbon-fibre fabrics', Comp. Sci. & Tech., 43:117-128.
Chou S. and C-J. Wu, 1992, A study of the physical-properties of epoxy-resin
composites reinforced with knitted glass-fiber fabrics, J. Reinforced Plastics &
Comp., 11:1239-1250.
Chou T.W. and F.K. KO, 1989, Textile Structural Composites, Volume 3 Composite
Materials Series, Elsevier Science Publishers, Amsterdam, New York, U.S.A., 1989.
Christensen R.M.,-1979, Mechanics of Composite Materials, John Wiley, USA
Christensen R.M., 1990, A critical evaluation for a class of micromechanics models, J.
Mech. Phy. Solids, 38:379-404.
Clayton G., P. Falzon, S. Georgiadis and X.J. Liu, 1997, Towards a composite civil
aircraft wing, Proc. of the 11th Int. Conf. on Composite Materials, ICCM-11, 14-18
July, 1-310-319.
Cox B.N., 1999, Constitutive model for a fiber tow bridging a delaminated crack, Mech.
Comp. Mat. & Struct., 6: 117.
Cox B.N., 2000, Simple, conservative criteria for buckling and delamination
propagation in the presence of stitching, J. Comp. Mat, 34:1136.
Cox B.N., W.C. Carter and N.A. Fleck, 1994, A Binary Model of Textile Composites-I.
Formulation, Acta Metall. Mater., 42:3463-3479.
Cox B.N. and M.S. Dadkhah, 1995, The Macroscopic Elasticity of 3D Woven
Composites, J. Comp. Mat., 29:785-819.
Cox B.N., M.S. Dadkhah, R.V. Inman, W.L. Morris and J. Zupon, 1992. Mechanisms of
compressive failure in 3D composites, Acta Metal. et Mat., 40:3285-3298.