Page 236 - 3D Fibre Reinforced Polymer Composites

References 225

Herrick J. W. and R. Globus, 1980, Impact resistance multidimensional composites,
Proc. of the 12* National SAMPE Technical Conf., 7-9 Oct, 845-856.
Herszberg I. and M.K. Bannister, 1993, Compression and compression-after-impact
properties of thin stitched carbodepoxy composites, Proc. 5* Aust. Aero. Conf., 20-
23 March.
Herszberg I., K.H. Leong and M.K. Bannister, 1995, The effect of stitching on the
impact damage resistance and tolerance of uniweave carbodepoxy laminates, Proc.
4" Int. Conf. Automated Comp., Vol. 1, 6-7 Sept., 53-60.
Herszberg I., T. Weller, K.H. Leong and M.K. Bannister, 1996, The residual tensile
strength of stitched and unstitched carbodepoxy laminates impacted under tensile
load, Proc. 1st Aust. Congress on Applied Mechanics, 21-23 Feb., 309-314.
Herszberg I., A. Loh, M.K. Bannister and H.G.S.J. Thuis, 1997, Open hole fatigue of
stitched and unstitched carbodepoxy laminates. Proc. 11" Int. Conf. Comp. Mat.
(ICCM-1 l), 14-18 July, Ed. M. L. Scott, Technomic Publishing, Lancaster,
Pennsylvania, pp. V-138 to V-148.
Hill R., 1965, Theory of mechanical properties of fibre-strengthen materials - 111. Self-
consistent model, J. Mech. Phys. Solids, 13: 189-198.
Hinrichsen J. 2000, Composite materials in the A3XX - From history to future, Proc. of
the 1st Stade Composite Colloquium, pp. vii-xxxvi.
Hohfeld J., M. Drews and R. Kaldenhoff, 1994, Roc. of the 31d Int. Conf. of Flow
Processes in Composite Materials, July 7-9, 120.
Hogg P., A. Ahmadnia and F. Guild, 1993, The mechanical properties of non-crimped
fabric-based composites, Comp., 24:423-432.
Holt H.B., 1992, Future composite aircraft structures may be sewn together, Auto. Eng.,
90, July, 46-49.
Hranac K., 2001, Evolving preforms are the core of complex parts, High Performance
Composites, September/October, 4 1-45.
Huang S.L., R.J. Richey and E.W. Deska, 1978, Cross reinforcement in a GREP
laminate, American Society of Mechanical Engineers, Annual Winter Meeting, 10-
15 Dec.
Huang Z.M. and S. Ramakrishna, 2000, Micromechanical modelling approaches for the
stiffness and strength of knitted fabric composites: a review and comparative study,
Composites, 31A:479-501.
Huang Z.M., Y. Zhang and S. Ramakrishna, 2001, Modelling of the progressive failure
behavior of multilayer knitted fabric-reinforced composite laminates, Comp. Sci. &
Tech., 61:2033-2046.
Huey C., 1994, Shuttle plate braiding machine, US Patent 5,301,596, 12 April.
Huysmans G., B. Gommers and I. Verpoest, 1996, Proc. of the 17" Int. SAMPE Europe
Conf., Basel, Switzerland, 97.
Huysmans G., I. Verpoest and P. Van Houtte, 2001, A damage model for knitted fabric
composites, Composites, 32A: 1465-1475.
Hyer M.W., H.H. Lee and T.W. Knott, 1994, A simple evaluation of thermally-induced
stresses in the vicinity of the stitch in a through-thickness reinforced cross-ply
laminate, Center for Composite Materials and Structures, Virginia Polytechnic
Institute and State University, CCMS-94-05.
Ishikawa T. and T.W. Chou, 1982a, Elastic behaviour of woven hybrid composites, J.
Comp. Mat., 162-19.