Page 239 - 3D Fibre Reinforced Polymer Composites

228 References

Kostar T. and T-W Chou, 1999, Braided Structures, 3D Textile Reinforcements in
Composite Materials, ed. A. Miravete, Woodhead Pub. Ltd, Cambridge, 2 17-240.
Kregers A.F. and Y.G. Melbardis, 1978, Determination of three dimensional reinforced
composites by the stiffness averaging method, Polymer Mechanics, 1 :3-8.
Kruckenberg T. and R. Paton, Eds, 1998, Resin Transfer Moulding for Aerospace
Structures, Kluwer Academic Publishers, Dordrecht.
Kullerd S.M. and M.B. Dow, 1992, Development of stitched/RTM composite primary
structures, Proc. of Fiber-Tex 1992, 27-29 Oct., NASA Conf. Pub., 321 1, 115-140.
Kuo W.-S. and T.-H. KO, 2000, Compressive damage in 3-axis orthogonal fabric
composites, Composites, 31A:1091-1105.
Laourine E., M. Schneider and B. Wulfhorst, 200, Production and analysis of 3D
braided textile preforms for composites, Proc. of the 51h Int. Conf. on Textile
Composites, Leuven, Belgium, 18-20 September, 55-58.
Larsson F., 1997, Damage tolerance of a stitched carbodepoxy laminate, Comp.
28A:923.
Lee B., K.H. Leong and I. Herszberg, 2001, The effect of weaving on the tensile
properties of carbon fibre tows and woven composites, J. Rein. Plastics & Comp.,
20:652-670.
Lee S., A. Rudov-Clark and A.P. Mouritz, M. Bannister and I. Herszberg, (in press),
Effect of weaving damage on the tensile properties of three-dimensional woven
composites, Comp. Struct.
Lee C. and D. Liu, 1990, Tensile strength of stitching joint in woven glass fabrics, J.
Eng. Mat. & Tech., 112:125-130.
Leong K. H., P. J. Falzon, M. K. Bannister and I. Herszberg. 1998, An investigation of
the mechanical performance of weft-knit Milano-rib glass/epoxy composites, Comp.
Sci. &Tech., 58:239-251.
Leong K.H., I. Herszberg and M.K. Bannister, 1995, Impact damage resistance and
tolerance of stitched carbon epoxy laminates, Proc. 6'h Aust. Aero. Conf., 20-23
March, 605-612.
Leong K.H., I. Herszberg, I. and M.K. Bannister, 1996, An investigation of fracture
mechanisms of carbon epoxy laminates subjected to impact and compression-after-
impact loading, Int. J. Crash, 1:285.
hng K.H., B. Lee, I. Herszberg and M.K. Bannister, 2000, The effect of binder path
on the tensile properties and failure of multilayer woven CFRP composites, Comp.
Sci. & Tech., 60:149-156.
Leong K.H., M. Nguyen and I. Herszberg, 1999, The effects of deforming knitted glass
fabrics on the basic composite mechanical properties, J. Mat. Sci., 34:2377-2387.
Leong K.H., S. Ramakrishna, G.A. Bib0 and Z.M. Huang, 2000, The potential of
knitting fbr engineering composites - a review, Composites, 3 1A: 197-220.
Li W., A. El Shiekh, 1988, The effect of processes and processing parameters on 3-d
braided preforms for composites, SAMPE Quarterly, 19:22-28.
Limmer L., G. Weissenbach, D. Brown, R. Mcllhagger and E. Wallace, 1996, The
potential of 3-D woven composites exemplified in a composite component for a
lower-leg prosthesis, Comp., 27A:27 1-277.
Liu C.H., J. Byan and T.-W. Chou, 1989, Mode I1 interlaminar fracture toughness of
three-dimensional textile structural composites, Proc. of the Fourth Japan-US Conf.
on Composite Materials, Technomic Publishing, Lancaster, PA, 98 1-990.