Page 244 - 3D Fibre Reinforced Polymer Composites

References 233

Shah Khan M.Z. and A.P. Mouritz, 1997, Loading rate dependence of the fracture
toughness and fatigue life of stitched GRP composites. Proc. 9" Int. Conf. on
Fracture (ICF9), 1-5 April, 809-818.
Sharma S.K. and B.V. Sankar, 1994, Effect of stitching on impact and interlaminar
properties of graphite/epoxy laminate, Proc. 9" ASC Annual Tech. Conf., 20-22
Sept., 700-708.
Sheffer E. and T. Dias, 1988, Knitting novel 3-D solid structures with multiple needle
bars, Proc. of the UMIST Textile Conf. - Textile Engineered for Performance,
Manchester, UK, April, 20-22.
Shembekar P.S. and N.K. Naik, 1992, Elastic behaviour of woven fabric composites: II-
Laminate analysis, J. Comp. Mat., 26:2226-2246.
Shu D. and Y.-W. Mai, 1993a, Delamination buckling with bridging, Comp. Sci. &
Tech., 47:25.
Shu D. and Y.-W. Mai, 1993b, Effect of stitching on interlaminar delamination
extension in composite laminates, Comp. Sci. & Tech., 49: 165.
Smith B.A., P. Proctor and P. Sparaco, 1994, Airframer's pursue lower aircraft costs,
Aviation Week & Space Tech., Sep 5,57-58.
Soebroto H., C. Pastore, F. KO, 1990, Engineering design of braided structural
fibreglass composite, Proc. 6" Annual ASM/ESD Advanced Composites Conf.,
ASM Int., 8-1 1 October, 435-40.
Steeves C. and N. Reck, 1999a, Z-pinned composite laminates: Knockdown in
compressive strength, Proc. DFC5, 18-19 March, London, 60-68.
Steeves C. and N. Fleck, 1999b, Proc. 12* Int. Conf. Comp. Mat., 5-9 July, Paris.
Stewart R., 2001, Composites Technology, November/December, 33.
Stoll GmbH, 1999, Flat knitting machinery for technical textiles, Technical Textiles
Int., November, 20-24.
Stover E., W. Mark, I. Marfowitz and W. Mueller, 1971, Preparation of an Omniweave-
reinforced carbon-carbon cylinder as a candidate for evaluation in the Advanced
Heat Shield screening program, AFML-TR-70-283, March.
Su K.B., 1989, Delamination resistance of stitched thermoplastic matrix composite
laminates, Advances in Thermoplastic Matrix Composite Materials, ASTM STF'
1044, Ed. G.M. Newaz, American Society for Testing and Materials, Philadelphia,
279-300.
Suarez J. and S. Dastin, 1992, Comparison of resin film infusion, resin transfer
moulding and consolidation of textile preforms for primary aircraft structure, Proc.
Fiber-Tex 1992, 27-29 Oct., NASA Conf. Pub., 321 1,353-386.
Susuki I. and T. Takatoya, 1997, Impact damage properties of 3-D carbonhismaleimide
composites, Proc. of the 5* Japan Int. SAMPE Symposium, Tokyo, 28-31 Oct., 691-
696.
Tada Y. and T. Ishikawa, 1989, Experimental evaluation of the effects of stitching on
CFRP laminate specimens with various shapes and loadings, Key Eng. Mat.,
37:305-3 16.
Tan P., 1999, Micromechanics models for mechanical properties and failure strengths of
2D and 3D woven composites, PhD Thesis, University of Sydney, Australia
Tan P., L. Tong and G.P. Steven, 1997a, Modelling for predicting the mechanical
properties of textile composites - A review, Composites, 28A:903-922.