Page 242 - 3D Fibre Reinforced Polymer Composites

References 23 1

Naik R.A., P.G. Ifju and J.E. Masters, 1994, Effect of fibre architecture parameters on
deformation fields and elastic moduli of 2-D braided composites, J. Comp. Mat.,
28~656-681.
Ogo Y., 1987, The effect of stitching on in-plane and interlaminar properties of carbon
epoxy fabric laminates, Report CCM-87-17, University of Delaware.
Owsley G.S., 2000, The effect of Z-fiberm reinforcement on fatigue properties of
stiffened panel panels, Proc. 15” Tech. Conf. American SOC. Comp., 25-27 Sept.,
Texas.
Palazotto A.N., L.N.B. Gummadi, U.K. Vaidya and E.J. Herup, 1999, Low velocity
impact damage characteristics of Z-fiber reinforced sandwich panels - an
experimental study, Comp. Struct., 43:275.
Palmer R.J., M.B. Dow and D.L. Smith, 1991, Development of stitching reinforcement
for transport wing panels, Proc. of the 1st NASA Advanced Composites Technical
Conf., Part 2,621-646.
Parnas R. S., 2000, Liquid Composite Moulding, Hanser Publishers, Munich.
Pang F., C.H. Wang and R.G. Bathgate, 1997, Creep response of woven fibre
composites and the effect of stitching, Comp. Sci. & Tech., 57:91.
Pang F., C.H. Wang and R.G. Bathgate, 1998, Modelling of the creep behaviour of
stitching and un-stitched woven composites, Proc. Mats. 98, Ed. M. Ferry, 735-740.
Partridge I.K. and D.D.R. CartiC, 2001, Increasing delamination resistance of
composites by z-pinning, Proc. ACUN-3,6-9 Feb., Sydney, 169-172.
Pastore C.M. and Y.A. Gowayed, 1994, A self-consistent fabric geometry model:
modification and application of a fabric geometry model to predict the elastic
properties of textile composites, J. Comp. Tech. & Res., 16:32-36.
Pelstring R.M. and R.C. Madan, 1989, Stitching to improve damage tolerance of
composites, Proc. 34’ Int. SAMPE Symp., 8-11 May, 1519-1528.
Phillips E., 2000, Composite wing box tested to failure, Aviation Week & Space
Technology, June 19,37.
Portanova M.A., C.C. Poe and J.D. Whitcomb, 1992, Open hole and postimpact
compressive fatigue of stitched and unstitched carbon-epoxy composites, In
Composite Materials: Testing and Design (Tenth Volume), ASTM STP 1120, Ed.
G.C. Glenn, American Society for Testing and Materials, Philadelphia, 37-53.
Popper P. 1991. Braiding, Int. Encyclopaedia of Composites, Vol 1, Ed. S.M. Lee, VCH
Publishers, 130-147.
Popper P. and R. McConnell, 1987, A new 3D braid for integrated parts manufacture
and improved delamination resistance - The 2-step process, Proc. of the 32”d Int.
SAMPE Symposium, 6-9 April, 92-103.
Potter K., 1997, Resin Transfer Moulding, Chapman & Hall, London.
Preller T., J. Brandt and K. Drechsler, 1990, ‘Manufacturing and mechanical properties
of new textile fiber preforms for structural sandwich applications’, Proc. of Textile
Composites in Building Construction, Part 3,307-317.
Rackers B., 1998, Resin Transfer Moulding for Aerospace Structures, Chapter 1:
Introduction to resin transfer moulding,, Eds. T. Kruckenberg, R. Paton, Kluwer
Academic Publishers, Dordrecht.
Rackers B., C. Howe and T. Kruckenberg, 1998, Resin Transfer Moulding for
Aerospace Structures, Chapter 13: Quality and process control, Eds. T.
Kruckenberg, R. Paton, Kluwer Academic Publishers, Dordrecht.