Page 243 - 3D Fibre Reinforced Polymer Composites

232 References

Ramakrishna S., 1997a. Analysis and modelling of plain knitted fabric reinforced
composites, J. Comp. Mat., 3152-70.
Ramakrishna S., 1997b, Characterization and modelling of the tensile properties of
plain weft-knit fabric-reinforced composites, Comp. Sci. & Tech., 57: 1-22.
Ramakrishna S., N. K. Cuong and H. Hamada, 1997, Tensile properties of plain weft
knitted glass fiber fabric reinforced epoxy composites, J. Rein. Plastics & Comp.,
16~946-966.
Ramakrishna S. and D. Hull, 1993, Energy-absorption capability of epoxy composite
tubes with knitted carbon-fiber fabric reinforcement, Comp. Sci. & Tech., 49:349-
356.
Ramakrishna S. and D. Hull, 1994a, Tensile behaviour of knitted carbon-fiber-
fabric/epoxy laminates: I. experimental, Comp. Sci.. & Tech., 50249-258.
Ramakrishna S. and D. Hull, 1994b, Tensile behaviour of knitted carbon-fibre-
fabridepoxy laminates: 11. prediction of tensile properties,. Comp. Sci. & Tech.,
50:259-268.
Reeder J.R., 1995, Stitching vs a toughened matrix: compression strength effects, J.
Comp. Mat., 29:2464.
Reider J. 1996, Knitting machines for technical textiles, Int. Textile Bulletin -
Nonwovens - Industrial Textiles, 1:60-63.
Reedy E.D. and T.R. Guess, 1986, Additional comparisons of interlocked fabric and
laminated fabric Kevlar 49/epoxy composites, J. Comp. Tech. Res., 8: 163-168.
Roberts R. and W. Douglas, 1995, 3 dimensional braiding apparatus, US Patent
5,337,647, 16 August.
Robinson F. and S. Ashton, 1994, Knitting in the third dimension - A look into the
future possibilities for knitted fabric, Textile Horizons, December, 12-15.
Rolincik P., 1987, Autoweavem - A unique automated 3D weaving technology,
SAMPE Journal, September/October, 40-47.
Rossi G.T., 1989, Evaluation of 3-D reinforcements in commingled, thermoplastic
structural elements, Proc. of the American Helicopter Society, 22-24 May. 509-5 15.
Ruan X.P. and T.-W. Chou, 1996, Experimental and theoretical studies of the elastic
behavior of knitted-fabric composites, Comp. Sci. & Tech., 56:1391-1403.
Rudd C.D., M.J. Owen and V. Middleton, 1990, Mechanical properties of weft knit
glass fibre/polyester laminates, Comp. Sci. & Tech., 39:261-277.
Rugg K.L., B.N. Cox, K.E. Ward and G.O. Sherrick, 1998, Damage mechanisms for
angled through-thickness rod reinforcement in carbon-epoxy laminates, Comp.,
29A: 1603.
Ruzand J.-M. and G. Guenot, 1994, Mulitaxial three-dimensional fabric and process for
its manufacture, Int. Patent WO 94/20658, 15 September.
Sawyer J.W., 1985, Effect of stitching on the strength of bonded composite single lap
joints. AIAA J., 23:1744-1748.
Schneider M., B. Wulfhorst and A. Pickett, 1998, Micromodelling of yarn architecture
in 3D-braids and transfer to macromodelling of composites, Proc. of the 4& Int.
Conf. on Textile Composites, Kyoto, Japan, 12-14 Oct., pp 0-5-1 - 0-5-8.
Shah Khan M.Z. and A.P. Mouritz, 1996, Fatigue behaviour of stitched GRP laminates,
Comp. Sci. & Tech., 56:695.