Page 240 - 3D Fibre Reinforced Polymer Composites

References 229

Liu D., 1987, Delamination in stitched and unstitched plates subjected to low-velocity
impact, Roc. 20d ASC Tech. Conf., Technomic Publications, 147-155.
Liu D., 1990, Delamination resistance in stitched and unstitched composite plates
subjected to impact loading, J. Rein. Plastics Comp., 9:59.
Liu D., 1990, Photoelastic study on composite stitching, Exp. Tech., Feb., 25-27.
Liu H-Y and Y.-W. Mai, 2001, Effects of z-pin reinforcement on interlaminar mode I
delamination, Proc. 13" Int. Conf. Comp. Mat., 25-29 June, Beijing, Paper No.
1319.
Lo, 1999, ITMA 99 Survey 4: Flat knitting machines, Textile Asia, August, 42.
Loud S. 1999. Lightweight FRP composite truss section decking developed', Adv. Mat.
& Comp., 21:l-2.
Lubowinski S.J. and C.C. Poe, 1987, Fatigue characterization of stitched graphitelepoxy
composites, Proc. Fibre-Tex 1987 Conf., NASA Conf. Pub. 3001,253-271.
Lundblad W.E., Dixon, C. and Ohler, H.C., 1995, Ballistic resistant article comprising a
three dimensional interlocking woven fabric, US Patent 5,456,974, 10 Oct.
Ma C.L., J.M. Yang and T.-W. Chou, 1986, Elastic stiffness of three-dimensional
braided textile structure composites, Composite Materials: Testing and Design (7th
Conf.), ASTM 893,404-421.
Macander A.B., R.M. Crane and E.T Camponeschi, 1986, Fabrication and mechanical
properties of multidimensionally (X-D) braided composite materials, Composite
Materials: Testing and Design (7 Conf.), ASTM STP 893, American Society for
Testing and Materials, Philadelphia, 422-443.
Maclander A.B., 1992, An X-D braided composite marine propeller, Proc. of the 10th
DOD/NASA/FAA Conf. on Fibrous Composites in Structural Design, Volume 11,
April, pp. VII-19 to VII-34.
Massabij R. and B.N. Cox, 1999, Concepts for bridged Mode I1 delamination cracks, J.
Mech. Phys. Solids, 47: 1265.
Massabb R., D.R. Mumm and B.N. Cox, 1998 Characterizing mode I1 delamination
cracks in stitched composites, Int. J. Fracture, 92: 1.
Malkan S.R. and F.K KO, 1989, Effect of fiber reinforcement geometry on single-shear
and fracture behaviour of three-dimensionally braided glass/epoxy composite pins,
J. Comp. Mat., 23:798-818.
Markus A., 1992, Resin transfer molding for advanced composite primary wing and
fuselage structures, Proc. of Fiber-Tex 1992, 27-29 Oct., NASA Conf. Pub., 321 1,
141-167.
McAllister L. and A. Taverna, 1975, A study of composition-construction variations in
3D carbonkarbon composites, Proc. of the 1975 Int. Conf. on Composite Materials,
Geneva, Switzerland, April 7-1 1, 1:307-326.
McConnell R. and P. Popper, 1988, Complex shaped braided structures, US Patent
4,719,837, January 19.
Mohamed M. and A. Bilisik, 1995, Multilayer three-dimensional fabric and method for
producing, US Patent 5,465,760, 14 November.
Mohamed M., Z. Zhang and L. Dickinson, 1988, Manufacture of Multilayer woven
Preforms, ASME, Advanced Composites Processing Technology, MD-Vol 5, Book
NO. 00484,81-89.
Morales A., 1990, Structural stitching of textile performs, Proc. 22"d Int. SAMPE Tech.
Conf., 6-8 Nov., 1217-1230.