Page 351 - Advances in Eco-Fuels for a Sustainable Environment

306 Advances in Eco-Fuels for a Sustainable Environment

[27] Jin F, Wang Y, Zeng X, Shen Z, Yao G. Water under high temperature and pressure con-
ditions and its applications to develop green technologies for biomass conversion. In: Appli-
cation of hydrothermal reactions to biomass conversion. Berlin: Springer; 2014. p. 3–29.
[28] Okoro OV, Sun Z, Birch J. Meat processing waste as a potential feedstock for biochem-
icals and biofuels—a review of possible conversion technologies. J Clean Prod 2017;
142(part 4):1583–608.
[29] Ruiz AH, Rodrı ´guez-Jasso RM, Fernandes BD, Vicente AA, Teixeira JA. Hydrothermal
processing, as an alternative for upgrading agriculture residues and marine biomass
according to the biorefinery concept: a review. Renew Sust Energ Rev 2013;21:35–51.
[30] LSU. Dielectric constant. Available from: http://macro.lsu.edu/HowTo/solvents/
Dielectric%20Constant%20.htm; 2018. Accessed 12 February 2018.
[31] Brilman W. Hydrothermal conversion of micro algae; 2013.
[32] Barbier J, Charon N, Dupassieux N, Loppinet-Serani A, Mah e L, Ponthus J, et al. Corre-
spondence between structure and reactivity during hydrothermal conversion of lignocel-
lulosic macromolecules. Oil Gas Sci Technol 2013;68(4):741–52.
[33] Chheda JN, Huber GW, Dumesic JA. Liquid-phase catalytic processing of biomass-
derived oxygenated hydrocarbons to fuels and chemicals. Angew Chem Int Ed 2007;
46(38):7164–83.
[34] Srokol Z, Bouche A, Estrik AV, Strik RCJ, Maschmeyer T, Peters JA. Hydrothermal
upgrading of biomass to biofuel: studies on some monosaccharide model compounds. Car-
bohydr Res 2004;339(10):1717–26.
[35] Okoro OV, Sun Z, Birch J. Prognostic assessment of the viability of hydrothermal lique-
faction as a post-resource recovery step after enhanced biomethane generation using
co-digestion technologies. In Press.
[36] Ma XJ, Cao SL, Lin L, Luo XL, Hu HC, Chen LH, et al. Hydrothermal pretreatment of
bamboo and cellulose degradation. Bioresour Technol 2013;148:408–13.
[37] Eberhardt TL, Catallo WJ, Shupe TF. Hydrothermal transformation of Chinese privet
seed biomass to gas-phase and semi-volatile products. Bioresour Technol 2010;101:
4198–204.
[38] Aida TM, Tajima K, Watanabe M, Saito Y, Kuroda K, Nonaka T, et al. Reactions of
D-fructose in water at temperatures up to 400°C and pressures up to 100 MPa.
J Supercrit Fluids 2007;42:110–9.
[39] Okoro O, Sun Z, Birch J. Experimental evaluation of a polystyrene sulphonic acid resin
catalyst in the hydrolysis of low-grade lipids from the meat processing industry. Biomass
Bioenergy 2018;116:49–59.
[40] Sivakumar V, Thirugnanasambandham K. Influence of process conditions on the physi-
cochemical properties of pomegranate juice in spray drying process: modelling and opti-
mization. J Saudi Soc Agric Sci 2015; https://doi.org/10.1016/j.jssas.2015.11.005.
[41] Czitrom V. One-factor-at-a-time versus designed experiments. Am Stat 1999;53(2):126–31.
[42] Cheng S, Wu CFJ. Factor screening and response surface exploration. Stat Sin
2001;11:553–604.
[43] Hegde S, Bhadri G, Narsapur K, Koppal S, Oswal P, Turmuri N, et al. Statistical optimi-
zation of medium components by response surface methodology for enhanced production
of bacterial cellulose by Gluconacetobacter persimmonis. J Bioprocess Biotech
2013;142:4. https://doi.org/10.4172/2155-9821.1000142.
[44] Granato D, Calado M. The use and importance of design of experiments (DOE) in process
modelling in food science and technology. In: Mathematical and statistical methods in
food science and technology. Oxford: John Wiley & Sons; 2014. p. 536.
[45] Jazrawi C, Biller P, He Y, Montoya A, Ross AB, Maschmeyer T, et al. Two-stage hydro-
thermal liquefaction of a high-protein microalga. Algal Res 2015;8:15–22.