Page 301 - Amphibionics : Build Your Own Biologically Inspired Robot
P. 301
Amphibionics 07 3/24/03 9:13 AM Page 280
Amphibionics
Drill the motor mounting holes and power switch hole, as indicat-
ed in Figure 7.8. Center the casters at the front and back of the
underside of the Frisbee, and mark the mounting holes with a pen-
cil, as shown in Figure 7.8. No dimensions for drilling were shown
in the figure because the exact position of the caster mounting
holes may vary, depending on the casters. When the holes have
been marked, drill with the bit sizes indicated.
FIGURE 7.8
Drilling guide for robot
base.
280
