Page 723 - Automotive Engineering Powertrain Chassis System and Vehicle Body

CHAP TER 2 1. 1 Interior noise: Assessment and control

References

BS 6086: 1981 (ISO 5128 – 1980), Method Cremer, L., Heckl, M., Structure borne of Acoustical Society of America, 23(5),
of measurement of noise inside motor sound – Structural vibrations and sound 509–516, 1951
vehicles, British Standards Institution, radiation at audio frequencies – Second Ingard, K.U., Dear, T.A., Measurement of
1981. edition, Springer Verlag, 1988 acoustic flow resistance, Journal of
J1074, Engine sound level measurement Crocker, M.J., Zockel, M., McGary, M., Sound and Vibration, 103(4), 567–572,
procedure, Society of Automotive Reinhart, T., Noise source identification 1985
Engineers, 1987 under steady and accelerating conditions Jackson, R.S., The performance of acoustic
ISO 140/1, Acoustics: measurement of on a turbocharged diesel engine, Vehicle hoods at low frequencies, Acustica, 12,
sound insulation in buildings and of Noise Regulation and Reduction - 139–152, 1962
building elements. SP-456, Society of Automotive Jackson, R.S., Some aspects of the
Engineers, Paper No. 800275, 1980
Part 1: Requirements for laboratories, performance of acoustic hoods, Journal
International Standards Organisation, Croker, M.D., Greer, R.J., Hilbert, D., of Sound and Vibration, 3(1), 82–94,
1990 Granstrom, J., The development of 1966
transmission rattle indices, IMEchE
ISO 140/3, Acoustics: measurement of Janssens, M.H.A., Verheij, J.W., Thompson,
sound insulation in buildings and of Paper No. C420/024, Published in D.J., The Use of an Equivalent Forces
building elements. Quiet Revolutions – powertrain and Method for the Experimental
vehicle noise refinement, international Quantification of Structural Sound
Part 3: Laboratory measurements of conference 9–11 October 1990, pp.
airborne sound insulation of building 129–135, 1990 Transmission in Ships, Journal of Sound
elements (amendment 1 to ISO 140/3 – and Vibration, 226(2), 305–328, 1999
1978), International Standards Dixon, J., Phillips, A.V., Power unit low Johnson, C.M., Vehicle exhaust sound
Organisation, 1990 frequency airborne noise, European specification development, SAE Paper
Conference on Vehicle Noise and
Allard, J.F., Sieben, B., Measurements of Vibration, Institution of Mechanical No. 951259, Society of Automotive
acoustic impedance in a free field with Engineers, C521/032/98, 1998 Engineers, 1995 Noise & Vibration
two microphones and a spectrum Conference, 1995
analyser, Journal of Acoustical Society of Fahy, F., Sound and structural vibration – Jonasson, H., Elson, L., Determination of
America, 77(4), 1617–1618, 1985 radiation, transmission and response, sound power levels of external sources,
Academic Press, 1985 Report SP-RAPP, National testing
Anderson, C.G., A review of phenomena
and associated experimental methods in Fahy, F.J., Sound intensity, Elsevier Applied institute, Acoustics laboratory, Borus,
automotive aero-acoustics, IMechE Science, London, 1989 Sweden, 1981
Paper No. C605/017/2002, 2002 Fahy, F., Walker, J. (eds), Fundamentals of Juneja, V., Rediers, B., Kavarana, F.,
Noise and Vibration, E&FN Spon, 1998 Kimball, J., Squeak studies on material
Atkins, K.A., Challen, B.J., A practical
approach to truck noise reduction, Glikin, P.E., Fuel injection in diesel engines, pairs, SAE Paper No. 1999-01-1727,
Institution of Mechanical Engineers, Proceedings of the Institution of 1999
C131/79, 1979 Mechanical Engineers, Vol. 199, D3, Kim, J., Vehicle cavity wind noise
161–174, 1985 experiments on a scale model in
Betella, M., Harrison, M.F., Sharp, R.S.,
Investigation of automotive creep groan Haines, J.C., Sound absorbing properties of a windtunnel, MSc Thesis, Cranfield
noise a distributed-source excitation molded fibreglass panels for use in University, 2003
technique, Journal of Sound and vehicle noise control, SAE Paper No. Kinsler, L.E., Frey, A.R., Coppens, A.B.,
Vibration, 255(3), 531–547, 2002 870987, Society of Automotive Sanders, J.V., Fundamentals of acoustics –
Engineers, 1987 Noise & Vibration Third edition, John Wiley & Sons Inc.,
Bies, D.A., Uses of anechoic and
reverberant rooms, Noise Control Conference, 1987 1982
Engineering Journal 7, 154–163, 1976 Halvorsen, W.G., Bendat, J.S., Noise Kuttruff, H., Room Acoustics – Second
Source Identification using Coherent edition, E&FN Spon, 1979
Bies, D.A., Hansen, C.H., Engineering noise
control – Theory and practice – Second Output Power Spectra, Journal of Sound Lalor, N., Grover, E.C., Priede, T., Engine
edition, E&FN Spon, 1996 and Vibration, pp. 15–24, August 1975 noise due to mechanical impacts at
Hardy, M., Whole vehicle refinement, pistons and bearings, Society of
Cheng, J.G., Akin, T., Air and structure
borne noise reduction of automotive Paper No. S477/001/97, IMechE Automotive Engineers, Paper No.
dampers, SAE Paper No. 951256, Seminar – Automotive modeling and 800402, 1980
Proceedings of the 1995 noise and NVH – techniques and solutions, Lilly, L.R.C., Diesel engine reference book,
vibration conference – Vol. 1, Society of Institution of Mechanical Engineers, Butterworths, London, 1984 (Second
Automotive Engineers, 1995 1997 edition now available – Challen,
Harper, M.F.L., Dorling, C.M., Allwright, Baranescu 1999)
Chung, J.Y., Blaser, D.A., Transfer Function
Method of Measuring In-duct Acoustic D.J., A non-intrusive method of LMS International – Application Note
properties. II. Experiment, Journal of signature analysis in systems with Transfer path analysis – the
Acoustical Society of America, 68(3), multiple noise paths. International qualification and quantification of
914–921, 1980 Journal of Modeling and Simulation, vibro-acoustic transfer paths, LMS
13(4), 146–151, 1993 International, 1998
Coney, W.B., Her, J.Y., Tomaszewicz, K.,
Zhang, K.Y., Moore, J.A., Experimental Ingard, K.U., Bolt, R.H., A free field March, J.P., Croker, M.D., Present and
evaluation of wind noise sources, SAE method of measuring the absorption future perspectives of powertrain
Paper No. 1999-01-1812, 1999 coefficient of acoustic materials, Journal refinement, European Conference on

734